You are here: Home » Archives for Parking Dynamics PD1 parking sensors
When you spend the money on a BMW you want to make sure it is protected against theft, accidents and anything else that could occur. So, why would you purchase your BMW and not buy parking sensors to help you protect it when parking? The answer is you wouldn’t. There are a couple of ways to get parking sensors on your BMW. You can order them from the dealership to come pre- installed. This can be a very expensive way to go. You may be wondering what happens if you buy the car used and not from a dealership? Well, for those who want a good system for the right price you have one option: you can purchase the BMW parking sensor Parking Dynamics PD1.
The BMW parking sensor Parking Dynamics PD1 offers all around protection in a universal parking sensor. You never have to worry about blind spots or damage again. The Parking Dynamics PD1 parking sensors will be able to detect all types of objects, like people, other vehicles, fences, bushes, and even curbs.
These car parking sensors are “invisible when fitted” which means they adhere to the back of your bumper. You don’t have to worry about ruining your factory look. They are no maintenance BMW parking sensors.
You have two BMW parking sensors that will need to be installed, but don’t worry you can do it yourself if you wish. You have a front parking sensor and a rear parking sensor. The rear parking sensor covers the entire bumper including the sides and corners. It will engage whenever you put the vehicle in reverse. The front parking sensor engages only with the press of a button near the dash. It also covers the entire bumper with one sensor.
There are different after market sensors you can purchase, but they don’t give you the same range as the BMW parking sensor Parking Dynamics PD1.
December 16, 2008 at 10:10 pm | Car Parking Sensor, Front Parking Sensor, Parking Accidents, Parking Aids, Parking Dynamics PD1, Parking Safety, Parking Sensor, Parking Sensor Installation, Rear Parking Sensor, Reverse Parking, Reversing Accidents, Reversing Safety | No comment
Tags:
BMW,
BMW parking sensor Parking Dynamics PD1,
BMW parking sensors,
car parking sensors,
Front Parking Sensor,
Parking Dynamics PD1 parking sensors,
Parking Sensor,
Parking Sensors,
Rear Parking Sensor,
sensor,
sensors,
universal parking sensor Trackback URL for this post:
http://www.parkingdynamics.co.uk/blog/parking-sensor/bmw-parking-sensor-parking-dynamics-pd1/trackback/
Parking accidents are common; what’s more they occur with higher frequency in countries with slick wet roads like the UK. As the season grows colder and snow begins to stick to the roads and parking areas you want to make sure your vehicle is covered. Everyone has to have insurance in order to get a vehicle registered, but when the average cost of vehicle accidents for parking is about 500 pounds you want to have the best protection available for your vehicle. There are two types of parking sensors on the market. These parking sensors are meant to give your vehicle all around protection from any type of parking accident that may occur. The first parking sensor is the JML parking sensor. The second type is the Parking Dynamics PD1 parking sensor.
We are going to look at both parking sensors to determine what parking aid may be best for you. The JML parking sensor is an ultrasonic sensor. The JML parking sensor kit requires four to six sensors to be placed on the vehicle for almost ‘all-around’ protection. The JML parking sensor is a no drills parking sensor. It adheres to the bumper with tape. Then from the parking sensor on the bumper the JML parking sensor technology routes a wired cord to the inside of your vehicle. This wire from the JML parking sensor will plug into your cigarette lighter in the car.
The JML parking sensor is not an ‘invisible when fitted’ design. In fact the parking aid does not hide the wire or the sensors at all. Most ultrasonic sensors will require holes to be drilled into the bumper. The JML parking sensors just adhere with tape. They could very easily drop off, get crushed, or just stop working. Ultrasonic parking sensors need maintenance because of their design. The JML parking sensor could very easily stop working, and even maintenance will not be able to correct the problem. Furthermore the JML sensors are a ‘DIY’ kit for £29.95. That may seem like a deal until you realise the parking aids are what you pay for. They are cheap and their quality will reflect that.
We want you to be protected inside your vehicle as well as have protection for your vehicle. The second type of sensor the Parking Dynamics PD1 parking sensor is an electromagnetic parking sensor. The electromagnetic parking sensor technology extends for a larger radius of protection than the ultrasonic sensor from JML. It can also read up to 10cm for closeness. In other words your bumper can come within 10cm of a parked car without faulty readings from the PD1 parking sensors.
The Parking Dynamics PD1 parking sensor also varies from the JML parking sensor in design. The electromagnetic parking sensor is an ‘invisible when fitted’ design because it attaches to the rear side of your bumpers rather than marring the factory bumper. You do not have to drill holes for the Parking Dynamics PD1 parking sensor. The electromagnetic parking sensor is also a maintenance free system. Due to the location of the parking sensors inside the bumper dirt and other build up will not occur. The Parking Dynamics PD1 parking sensors are also stationary, meaning they will never move and therefore adjustment is unneeded.
The Parking Dynamics PD1 parking sensor does require a professional to fit the parking sensors to your bumper. You can do it yourself only if you truly understand how parking sensors work and how cars work. The point is the Parking Dynamics PD1 parking sensor will not have any unsightly wires or be faulty in any way.
The PD1 parking sensors also extend the entire length of the bumper, rather than being 4 to 6 sensors like the JML parking sensor. The electromagnetic parking sensor allows for the corners and sides of your vehicle to be well protected from any damage from objects. The Parking Dynamics PD1 parking sensor is also a universal design. The parking aids will work on almost every vehicle manufactured. The cost of the PD1 parking sensors is more than the JML parking sensor, but you do get a quality product in the PD1 parking aids.
For more information regarding the Parking Dynamics PD1 parking sensor design for both the rear parking sensor and front parking sensor go to
www.parkingdynamics.co.uk/technical and
www.parkingdynamics.co.uk/features. Both of the pages explain in full detail how the Parking Dynamics PD1 parking sensor works and why it is superior over the JML parking sensor with ultrasonic design.
December 5, 2008 at 10:56 pm | Car Parking Sensor, Electromagnetic Parking Sensor, Front Parking Sensor, Parking Accidents, Parking Aids, Parking Dynamics PD1, Parking Safety, Parking Sensor, Parking Sensor Installation, Rear Parking Sensor, Reverse Parking, Reversing Accidents, Reversing Safety | No comment
Tags:
Electromagnetic Parking Sensor,
JML parking sensor,
JML parking sensors,
no drill parking sensor,
parking accident,
Parking Accidents,
Parking Aids,
parking dynamics,
Parking Dynamics PD1 parking sensor,
Parking Dynamics PD1 parking sensors,
Parking Sensor,
Parking Sensors,
PD1 parking aids,
PD1 parking sensor,
PD1 parking sensors,
sensor,
sensors,
ultrasonic sensor,
Ultrasonic sensors,
www.parkingdynamics.co.uk Trackback URL for this post:
http://www.parkingdynamics.co.uk/blog/parking-sensor/jml-parking-sensor-vs-parking-dynamics-pd1-parking-sensor/trackback/
Parking sensors can come on any vehicle from the factory as long as you make the additional purchase. With Lexus dealers a package with parking sensors can cost upwards of 500 pounds. It will be closer to 1000 pounds if you decide to get the self parking Lexus model with back up cameras. The dealer packages are expensive, but you know they are installed and your vehicle will be safe as soon as you drive it off the lot.
We have a different solution for you if the package for Lexus parking sensors is too much from the dealer. Also, what if you buy your Lexus used? How can you get parking sensors on a used vehicle? To ensure that your vehicle is always safe we have the solution with the Parking Dynamics PD1 parking sensors. The PD1 parking sensor is an aftermarket product that is easy to install and “invisible when fitted.” In fact it is a no holes parking sensor, which means your bumper will look factory new.
The ease of installation combined with the cost of the parking sensor kits make them worthwhile even on a Lexus. What makes the PD1 parking sensors even better is that they work on any vehicle. You could purchase the parking sensors and a couple years later remove them and place the parking sensors on your new vehicle.
You have all around protection for curbs, pedestrians, and other vehicles that may be in the area you are parking. You never have to worry about damaging your front or rear bumper again. At Parking Dynamics we have three different parking sensors to sell. There is the front parking sensor, rear parking sensor, and the rear vision parking sensor. The front parking sensor works with a button under the dash to engage it. The rear parking sensors actually hook into your gear shift, so every time you go in reverse you will have the parking sensor engaged. The rear vision parking sensor offers a LED sensor to go with the audio tones to help you gauge the area behind you better.
To protect your Lexus, purchase one of our Lexus parking sensors from Parking Dynamics. They are universal parking sensors.
November 30, 2008 at 9:43 pm | Car Parking Sensor, Front Parking Sensor, Parking Accidents, Parking Aids, Parking Dynamics PD1, Parking Safety, Parking Sensor, Rear Parking Sensor, Reverse Parking, Reversing Accidents, Reversing Safety | No comment
Tags:
Front Parking Sensor,
front parking sensors,
lexus parking sensors,
no holes parking sensor,
Parking Dynamics PD1 parking sensors,
Parking Sensor,
parking sensor kits,
Parking Sensors,
PD1 parking sensor,
Rear Parking Sensor,
rear vision parking sensor,
universal parking sensors Trackback URL for this post:
http://www.parkingdynamics.co.uk/blog/parking-sensor/lexus-parking-sensors/trackback/
