Parking Safety Requires Parking Aids for All- Around Protection

The PD1 car parking sensor tells you where your bumpers are and how close they are to another object. The object in question could be a car bumper, side panel, curb, person, or anything else you could run into that would cause damage to your vehicle. By having the PD1 no drill parking sensor you can always avoid damaging your vehicle and other objects around you.

The parking sensor works by casting a field to receive information. This field relays to the sensor how close the object is to the bumper. It will then send a signal to the driver in the car. The signal depending on where or how you are parking can tell you if you are close or too close. For example the rear parking sensor has three zones. The zones tell you the distance you are at from an object. If the beep you hear is steady then stopping and repositioning is your only choice. If you have an inconsistent beep you still have room to manoeuvre.

The front parking sensor only has two zones, but it works with the same principle. To engage the front parking sensor you need to push a button under the dash. The reverse parking sensor is automatically engaged as soon as you put the car in reverse. For parking safety all the time, make sure you use parking aids like the ones found at www.parkingdynamics.co.uk. You can also find out more about their product at the website.