To park safely at your home, in a garage, or on the street at a busy shopping area you want to ensure your car has the best protection. Sometimes parking accidents result due to other driver error when parking. For this a nice security system assures you that you will be notified of the incident. Unfortunately the security options don’t protect you when the car is in motion and you are trying to park or un-park. For this you need parking aids like the PD1 Parking Dynamics car parking sensor.
The PD1 car parking sensor tells you where your bumpers are and how close they are to another object. The object in question could be a car bumper, side panel, curb, person, or anything else you could run into that would cause damage to your vehicle. By having the PD1 no drill parking sensor you can always avoid damaging your vehicle and other objects around you.
The parking sensor works by casting a field to receive information. This field relays to the sensor how close the object is to the bumper. It will then send a signal to the driver in the car. The signal depending on where or how you are parking can tell you if you are close or too close. For example the rear parking sensor has three zones. The zones tell you the distance you are at from an object. If the beep you hear is steady then stopping and repositioning is your only choice. If you have an inconsistent beep you still have room to manoeuvre.
The front parking sensor only has two zones, but it works with the same principle. To engage the front parking sensor you need to push a button under the dash. The reverse parking sensor is automatically engaged as soon as you put the car in reverse. For parking safety all the time, make sure you use parking aids like the ones found at
www.parkingdynamics.co.uk. You can also find out more about their product at the website.
November 6th, 2008
Shelved in the
Front Parking Sensor,
Parallel Parking,
Parking Accidents,
Parking Aids,
Parking Dynamics PD1,
Parking Safety,
Parking Sensor,
Rear Parking Sensor,
Reverse Parking,
Reversing Accidents,
Reversing Safety,
car parking sensor category
Parking Dynamics has the only electromagnetic parking sensor on the market for a variety of cars. You can purchase a PD1 parking sensor at www.parkingdynamics.co.uk. The BMW parking sensor, Peugeot parking sensors, Lexus parking sensors, and even Audi parking sensors are available at the above website. The PD1 parking sensor does not work on every car and some cars may come from the manufacturer with car parking sensors already installed. However, for the vehicles you need parking sensors on your answer will be Parking Dynamics.
There are two types of parking sensors on the market: the electromagnetic parking sensor and the ultrasonic parking sensor. The ultrasonic parking sensor is an older technology. It was created to produce an ultrasonic sound to bounce of an object that then sends the signal to you in the car. Before the signal can reach you it must go to another parking sensor that will receive the information. The ultrasonic parking sensor set up has 4 to 6 sensors for sending and receiving information. You also have a smaller area the sensor can read for objects in the way.
The electromagnetic parking sensor has a magnetic pulse it sends out to read objects on the entire bumper, including the corners and sides. There are two sensors with the PD1 car parking kit. You have a front parking sensor, and a reversing parking sensor. The sensors are able to send and receive, rather than needing two sensors to send and one to receive like the ultrasonic parking sensor.
Steel Mate and Laserline are ultrasonic parking sensors. The Steel Mate works on metal bumpers, but so does the PD1 car parking sensor. The PD1 just needs a small modification in order to fit to the metal bumper. The electromagnetic parking sensor is also an “invisible when fitted” parking sensor. It is a no holes no drill parking sensor. It will not change the appearance of your bumper in the least. The Ultrasonic parking sensor requires bumper modification and matching paint. As you can see there are several reasons why the electromagnetic parking sensor is the best.
November 4th, 2008
Parking safety is a must when driving whether you are concerned about hurting your own car or another person that could be walking near your vehicle. To ensure that you have parking safety in mind you should have an electromagnetic reverse parking sensor and front parking sensor. The PD1 car parking sensor from Parking Dynamics is a revolutionary design that used to be available only through certain car manufacturers.
There are two types of car parking sensors on the market: the ultrasonic parking sensor and electromagnetic parking sensor. The ultrasonic parking sensor has a smaller range and doesn’t work well on the corners of the car. It also comes with 4 to 6 sensors. The ultrasonic parking sensor needs many sensors because some of them read the information and send, and then you need a sensor to receive.
The electromagnetic reverse parking sensor and front parking sensor uses two sensors: one in the rear and then the front. These two sensors relay and receive information. Furthermore the electromagnetic parking sensor works on the corner of the bumpers and is “invisible when fitted.” You do not need to drill holes into your bumper or find matching paint with the Parking Dynamics PD1 parking sensor. Instead you fit it to the backside of the bumper out of site. It takes just a few minutes to install the parking sensors, and another few minutes to link the sensor to your gear shift and front sensor button.
You may just want the rear parking sensor, which is okay. It will help you with the blind spots, but truly you should have full vehicle coverage for all parking safety. You never know when someone or thing will be at the front of the car when you are looking towards the rear.
November 3rd, 2008
Shelved in the
Front Parking Sensor,
Parking Accidents,
Parking Aids,
Parking Dynamics PD1,
Parking Safety,
Parking Sensor,
Parking Sensor Installation,
Rear Parking Sensor,
Reverse Parking,
Reversing Accidents,
Reversing Safety,
car parking sensor,
electromagnetic parking sensor category
Parking your car whether you pull into a slot or back in can be a little nerve racking in the tiny spaces we have today. This is why learning a few reversing parking tips can help you avoid damaging your vehicle and have an overall sensor of parking safety. Reversing is the most difficult part of parking or un- parking your vehicle. There are certainly options like the PD1 car parking sensor, which helps you figure out where your bumpers actually out, but what if you want more than just a parking aid?
· First of all the electromagnetic reversing sensor casts a wide net for the front and back bumper to read objects that may be in your path, but out of sight. A vehicle does have blind spots.
· You can position your mirrors to account for some of the blind spots, but this doesn’t always take care of the issue when you are reverse- parking.
· By relying on the electromagnetic rear parking sensor is not a good thing either. What we mean is that you can listen for the beep to change as you get closer to an object, but you should still keep an eye out in your mirrors for possible road blocks. People are the hardest to keep track of and the parking aids may not pick them up as quickly as they move.
· The reverse parking sensor is supposed to tell you when you get closer to an object, but it must read the area by sending a quick signal to you.
Based on these reverse parking tips so far you need to rely both on yourself and the reverse car parking sensors, and not one or the other. A camera system along with the Parking Dynamics PD1 parking sensor is also a great addition to the whole reverse issue.
When you reverse your vehicle you need to keep in mind that looking in the mirrors is better than looking over your shoulder. This allows your hands to turn the wheels accordingly rather than getting confused about the wheel direction you need. The car parking sensor will also help you determine the route your wheel should be turned based on the objects in the way.
November 2nd, 2008
Shelved in the
Front Parking Sensor,
Parking Accidents,
Parking Aids,
Parking Dynamics PD1,
Parking Safety,
Parking Sensor,
Rear Parking Sensor,
Reverse Parking,
Reversing Accidents,
Reversing Safety,
car parking sensor,
electromagnetic parking sensor category
Car parking sensors are great to have on a vehicle for many reasons. First your insurance premium may lower because you are providing more safety features on your car. The insurance companies like to see a lower risk for claims, and lesser claims sent in. Anything that can help you negate a claim on your vehicle is more than worth it. You also have the benefit of not getting in an accident, which means you don’t need money to fix your vehicle, especially if you don’t make the deductible in the damage. We have mentioned in other articles what the parking aids will do for you. We have even mentioned in some of these articles how the electromagnetic parking sensors work; however we have only scratched the surface on how to fit parking sensors. At www.parkingdynamics.co.uk you will be able to purchase the Parking Dynamics PD1 parking sensor.
The PD1 parking sensor is an “invisible” when fitted design. This means you do not have to make modifications to your bumper in order to fit your parking sensors. They are a no drill parking sensor. Here is how to fit parking sensors:
Step 1: You will need to remove the bumper to have better access to the inside area of the bumper. Before you remove your bumper though measure from the ground to between 40 and 50cm. The parking sensors must be within that range to work most effectively. You will need to mark the measurement to help you get the parking sensor fitted.
Step 2: Once the bumper is measured and removed you may begin to fit the car parking sensor. You may start with the reverse parking aid, as this could have a metal bar in the way. The bar is a metal crash protection inside the bumper in some vehicles. This can get in the way. You may have to circumvent this by going below or above it.
Step 3: The PD1 parking sensor has an adhesive tape that comes in the PD1 kit. This adhesive tape will allow you to fit the car parking sensor to the back of the bumper. The parking aid will run the entire length of the bumper rather than just one section. This helps for all around protection. The front parking sensor will be fitted in the same manner, but typically you don’t have a metal crash protection bar in the way. Some cars may though, so be prepared to move around it.
When you ask how to fit parking sensors, you may need to be concerned with the metal bumpers. Some vehicles still have a metal bumper. With just a small modification you can also fit the PD1 car parking sensor to the metal bumper.
November 1st, 2008
Shelved in the
Front Parking Sensor,
Parking Accidents,
Parking Aids,
Parking Dynamics PD1,
Parking Safety,
Parking Sensor,
Parking Sensor Installation,
Rear Parking Sensor,
Reverse Parking,
Reversing Accidents,
Reversing Safety,
car parking sensor,
electromagnetic parking sensor category
Parallel parking often incites fear among new drivers, and occasionally individuals who have been driving for years. In the UK there are many streets that require parallel parking, and the streets tend to be very small. If you are worried about damaging your vehicle or another person’s vehicle while parallel parking then you might want to consider the electromagnetic parking sensor. We will begin to look at how to parallel park using the electromagnetic parking sensors by describing what they do, and then how they can help.
The electromagnetic parking sensor will send out a signal in a magnetic field. This magnetic field will read the objects around the vehicle with the car parking sensor. It will be able to tell the driver how close they come to an object in their path. The electromagnetic parking sensor from
www.parkingdynamics.co.uk offers a front and rear parking sensor. The reverse parking sensor has three zones. In the three zones the parking sensor tells the driver when they get closer to an object or need to stop before damage occurs.
The front parking sensor will also determine when the driver will need to stop before hitting something ahead of them. The front parking sensor only has two zones. So now you might ask how to parallel park using these electromagnetic parking sensors.
You know that you must pull up alongside the car in the space in front of the one you want. You should pull up until your passenger window is about halfway between the other car’s side mirror. Then you start to back up, and slowly turn the wheel. You are going to be in almost a 45 degree angle with the curb when your car reaches the halfway mark at the bumper. In other words the bumper of the car in front is out your passenger window. Typically the reverse parking aid will tell you that you are close to the curb behind you, and it could be signalling you to stop. This is good. At this point you start to turn the wheel in the other direction to swing the back end out and move the front in end. This is where the electromagnetic parking sensor or the front parking sensor comes in. You want to be close to the vehicle in front of you, but you want your front bumper to miss it. By using the signals of the front parking senor you can tell if you are to close and need to reposition.
Once the front bumper is in the parking spot you still have to be cautious of the rear bumper of your car and the car behind you. The reverse parking aid will tell you if you are too close to the car behind you as you straighten out the car. You may also find that you need to pull forward to get in the space straight, which is another instance for the front parking sensor to read your location.
The electromagnetic parking sensor allows you to park without causing damage when you parallel park.
October 31st, 2008
Shelved in the
Front Parking Sensor,
Parallel Parking,
Parking Accidents,
Parking Aids,
Parking Dynamics PD1,
Parking Safety,
Parking Sensor,
Rear Parking Sensor,
Reverse Parking,
Reversing Accidents,
Reversing Safety,
car parking sensor,
electromagnetic parking sensor category
Car parking sensors allow you to keep your vehicle safe in a number of different ways. You may be reversing from your drive way and need to stop. In other instance you might be pulling out of a parking space when another car tries to race by. There are several reasons why you might find garage parking aids and car parking sensors important to your safety. This is why we are going to outline how the garage parking aids work.
To begin the garage parking aids from Parking Dynamics are reverse parking sensors as well as front parking sensors. They will be able to read the area around you to help you avoid any object that could be in your way. There are many cars one the market that have blind spots when backing up or going forward. For example a BMW has a long hood, which could pose a problem for seeing where it ends when backing up or pulling forward. The blind spots you have can make parking in a garage very difficult. To avoid hitting the sides of the garage in either a reverse or forward direction you can place two parking sensors on your vehicle.
The garage parking aids work in two different ways. The front parking sensor will be engaged with a button that fits under the steering wheel. It will offer you two zones for how close you come to an object such as a human, curb, building or even another vehicle. The rear car parking sensor works by engaging as soon as the vehicle is put in reverse. It has three zones to tell you how close you are to any object. By using these sensors you can avoid the sides of your garage building and back out cleanly. You could also park in the garage backwards without any reservations. It may make it easier to leave in the morning. No matter what you need the Parking Dynamics PD1 parking sensor for it is there to help you.
October 29th, 2008
Shelved in the
Front Parking Sensor,
Parking Accidents,
Parking Aids,
Parking Dynamics PD1,
Parking Safety,
Parking Sensor,
Rear Parking Sensor,
Reverse Parking,
Reversing Accidents,
Reversing Safety,
car parking sensor category
All around vehicle protection is imperative whether you are parking or leaving your car for a couple of hours. You want to make sure that no damage can hurt your vehicle for many reasons. No claims on your insurance can mean you have a lower payment, which is just one reason to have protection on your car. Car parking sensors are another way to protect your car from damage that a driver may incur. For example when teaching a teenager to drive a car there is a lot to worry about regarding claims and damage. So why not help out your teenager with all around protection in the form of parking sensors?
To give you an idea on how the parking aids work we will first take a look at the PD1 Parking Dynamics kit you might consider purchasing. It is an electromagnetic parking sensor that allows for more protection than the ultrasonic parking sensors. It is also the only hidden parking sensor of its kind. You have two parking sensors with the Parking Dynamics kit. You have a front parking sensor and a reversing sensor.
The reversing sensor is engaged whenever the car is placed in reverse. It tells you when you get to close to an object that is behind you. The rear reverse sensor will be able to help you avoid incidents with blinds spots, as well as help your teenager learn to drive sensibly.
The front parking sensor is separate from the rear sensor in that you have a button under your dash to engage the forward parking aid. Once the front parking sensor is engaged it will tell you if you are to close when pulling in or backing out of a parking space. You could even engage the front parking sensor in heavy traffic to make sure you are not close to bumpers as you merge onto a busy street.
The front and reverse parking aids have zones that they read to ensure you are not too close to any object be it another car or person.
October 28th, 2008
There is a reason commercial trucks have parking sensors. In a commercial truck you have two side mirrors, but often the rear view mirror doesn’t exist. It can make backing up difficult, especially with the many blind spots a commercial vehicle has. The parking sensors are not only for commercial vehicles anymore. The parking sensors can be used on any vehicle from the smallest car to the large personal truck you have.
Typically the most difficult parking aspect is reversing. For optimal parking safety using car parking sensors is imperative, but if you can’t afford the front parking sensor you can opt for the reverse parking sensors or you can have both front parking sensors and rear. You may feel comfortable with just a reverse parking sensor for an extra set of eyes, so let’s look at how the rear parking sensor can help you park your vehicle with safety in mind each time.
There are a couple of methods to reverse parking. You can parallel park, park forward and have to back out, or you can back into a parking space. We will concentrate on the backing into parking spaces safety.
The car reversing aids need to be placed on the inside of the bumper about 40 to 50 centimetres from the ground. There are electromagnetic parking sensors that allow for this type of installation. They are no drills parking sensors for optimal safety and looks. The tape just affixes the rear parking sensor to the inside of the bumper. Then the CAN Bus wiring system is routed to the gear shift, to help the parking sensor engage when you put the car in reverse.
When the car is in reverse the reverse sensor is working to scan the area you will back into. For backing into parking spaces safety it is imperative to have all around protection reading how close you might be to another car or the wall behind you. The reversing sensors will guide you with zones. There are three zones. The first zone is not a continuous beep, but more of a beep in warning. The second zone lasts a little longer, and the third and final zone is a consistent beep relayed to you in the vehicle. It is this sound you need to be careful of. It states that repositioning the vehicle is a must before you encounter the object it “sees.” By stopping the car you can avoid any damage.
The PD1 electromagnetic parking sensor will be the best option in the reverse parking sensor category for several of the reasons mentioned above. You can find these parking sensors at
www.parkingdynamics.co.uk
October 27th, 2008
Shelved in the
Parallel Parking,
Parking Accidents,
Parking Aids,
Parking Dynamics PD1,
Parking Safety,
Parking Sensor,
Rear Parking Sensor,
Reverse Parking,
Reversing Accidents,
Reversing Safety,
car parking sensor,
electromagnetic parking sensor category
There are a couple of different car parking sensors on the market. The ultrasonic parking sensor will require holes to be drilled into the bumper of the vehicle. It also requires 4 to 6 parking sensors and a bit of a paint job. They can be downright unsightly, and luckily they are not the only option a car owner has. The second type of car parking sensor is the electromagnetic parking sensor. Parking Dynamics is the only company to have this revolutionary technology, outside of car manufacturers.
The PD1 sensor you can purchase at
www.parkingdynamics.co.uk is a no drill and no holes parking sensor. In fact they are hidden parking sensors that affix to the back of the car’s front and rear bumper. How the car parking sensor works is that a tape is used on the sensor wire to make sure it is attached to the bumper securely. This means the electromagnetic parking sensor will work on almost any bumper surface. The only problem is with metal bumpers, you need a small addition to the parking sensor to make it work. It really isn’t much of a problem, when you consider the ultrasonic parking sensors like LaserLine and Steel Mate.
The tape to attach the car parking sensor is used on the inner side of the bumper and not on the front. The factory bumper will remain unchanged and look good as new, after you have affixed the sensor. This is why they are hidden parking sensors. You also have a different set up than the ultrasonic parking sensors. Remember, above we said you needed four to six sensors to get maximum protection on your car? Well, with the PD1 Parking Dynamics car parking sensor you only need two sensors; the front parking sensor and the reverse parking aid. The parking sensors have technology that allows them to send and receive messages rather than having one sensor on the bumper to receive and another parking aid to send.
You also have more protection with the hidden parking sensor. The electromagnetic parking sensor has a wider range on the actual bumper to protect it. It can sense things to the side and corners of a bumper for all around protection. The ultrasonic parking sensor has limits on corners as well as its field of detection. To fully protect your vehicle the hidden parking sensor from Parking Dynamics will be your best option. You have no modifications, more protection for the entire car, and it is easy to install.
October 26th, 2008
« Previous Entries
Next Entries »
You may also be interested in the following sponsored links:
International Orders Welcome!
