Parking Dynamics PD1 Skoda Parking & Reversing Sensors use a Unique, No Holes Design that is invisible when fitted. No Drill. No Holes. No Damage!

The Skoda Parking Dynamics PD1 Reverse Parking Sensor uses a unique 100% Accurate, Responsive and Reliable Electromagnetic Sensor Technology that makes parking Safer and Easier, preventing Bumps, Scrapes and Nasty Bangs.

This reverse parking sensor technology is available as a Front and Rear reverse parking sensor giving your vehicle all round parking and reversing protection and giving you Total Parking and Reversing Confidence.

A Skoda Reverse Parking sensor that fits all Cars, Vehicles, Vans, 4×4s, MPVs, SUVs & Motor Homes gives you total flexibility and optimum compatibility. The PD1 Detects all objects including People, Vehicles, Small & High Kerbs, Pillars, Posts, Walls, Fences, Barriers, Garage Doors, Skips, etc.

As recently reported by the insurance industry, 27% of vehicle accidents are now caused by driver error, when parking and reversing! With more cars on the road now than ever before, the Risk is even greater for accidents to occur. The Skoda Parking Dynamics PD1 will give you peace-of-mind and total parking confidence.

Unique Design:

This unique adhesive metallic antenna design mounts discretely on the inner side of your plastic bumper preserving the ‘new factory look’ of your vehicle and maintains the sleek aesthetic lines of today’s prestige vehicles. Far superior in design and performance to the ultrasonic type of sensor that has ugly and visible sensors.

Totally unique in design, the Skoda PD1 reverse parking sensor is a superior alternative to the older ultrasonic type sensor technology that requires you to drill 4 or 6 holes in your bumper, mounting ugly black sensors that then need painting to colour code and match the shade of your bumper… The Parking Dynamics PD1 makes this a thing of the past!

Find out more about the Parking Dynamics PD1 Skoda Reverse Parking Sensor

 Technical Operation:

When reverse gear is selected the small control unit generates a magnetic field and transfers this to the transceiver adhesive strip that is placed on the inner side of and run the length of your bumper. The PD1 Front sensor is activated by a a switch and works in exactly the same way as the PD1 rear reverse sensor.

The magnetic strip then sends out an elliptical magnetic field to cover the full area around your bumper, front, rear and sides. The transceiver strip works by sending and receiving unlike ultrasonic parking and reverse sensors that require 2 types of sensors, one to send and one to receive; if they become dirty the ultrasonic performance can deteriorate.

Mass is then monitored by the control unit by translating this into a voltage. When an object (i.e. people, kerbs, cars, etc) heavier in mass than the magnetic field enters this elliptical zone, an increase in voltage is detected by the control unit and you are then informed by a series of Skodable tones or display (PD1-Vision only) how close you are to the object. You can then manoeuvre accordingly with plenty of time to react.

User Operation giving Full Bumper Coverage and Early Detection:

Using Electromagnetic Technology, the Skoda PD1 reverse parking sensor will scan the full length of your bumper, from end to end picking up all objects behind your vehicle. The PD1 detects children, people, adults the elderly plus cars, vehicles, small kerbs, walls, barriers, pillars, posts, skips, etc. Whatever is behind you can rest assured the Skoda PD1 will detect this object and alert you to its presence allowing you to react, with time to spare.

When reverse gear is engaged the reverse parking sensor system provides an instant, automatic, self-diagnostic function that maps out the surrounding area of your bumper constantly monitoring this as you reverse with 100% accuracy, providing you with 3 different Skodable tones (Zones) alerting you of your proximity in relation to surrounding objects!

As you reverse Zone 1 (furthest away from the object) picks up the object first.

Zone 1: 0.8 to 0.5 Metres in length - The 1st tone signals with a slow "be-be-be" sound

Zone 2: 0.5 to 0.25 Metres in length - The 2nd tone is a faster "be-be-be" sound

Zone 3: 0.25 to 0 Metres in length - the 3rd tone is a constant "beeeeeep" sound

 Skoda Parking Dynamics PD1 Advantages Are Clear!

Parking Dynamics PD1 fits all Cars, Vehicles, Vans, 4×4s, MPVs, SUVs and Motor Homes giving you maximum compatibility, functionality, reliability and high performance accuracy.

The PD1 is flexible and allows you to move the sensor from vehicle to vehicle upon resale, for the minimum cost of a replacement antenna. No bumper adjustments make this ideal for Rental and Leasing companies.

No Visible Parts, Period! The Parking Dynamics PD1 when fitted is a completely discrete and totally invisible. Only you will know it’s fitted. This ensures a no-holes installation, a higher value to your car—and a more desirable car.

Being CAN bus compatible ensures the PD1 integrates seamlessly with both older conventional wiring systems and the latest intelligent (CAN Bus) multiplex wiring systems. Connect the wrong aftermarket reverse parking sensor and it could be costly. Parking Dynamics is the solution to this dilemma!

No-Drill! The PD1 is fitted without drilling your bumper and unlike ultrasonic type parking sensors there are NO ugly sensors to be mounted in your bumper and then painted. No need to match the paint colour.

A Maintenance FREE Front and Rear parking and reverse sensor technology - No Cleaning, No Adjustment and No Painting of sensors or Constant Testing required!

100% accurate, responsive and reliable in all parking situations and weather conditions - Regardless of the conditions: Sun, Rain, Wind, Snow or Hail the PD1 works and gives you accurate feedback in real time, every time.

Skoda Reverse Parking sensors help and result in a major decrease in minor damage collisions caused when parking and reversing. This simple device will pay for itself many times over by reducing the number of small bangs in which you are involved. Completely eliminating the chance of putting your No Claims Bonus at risk!

Find out more about the Parking Dynamics PD1 Skoda Reverse Parking Sensor

 The Skoda Reverse Parking Dynamics PD1 System comprises of the following!

- The Speaker is small and at just 20mm in diameter mounts anywhere inside of the vehicle and can be run to any location. The Skodable tones that are emitted to alert you of the proximity of surrounding objects can be clearly heard even when mounted at the back of the vehicle close to or behind interior panels.

- The Electronic Control Unit (ECU) is the ‘brain’ of the PD1, and mounts securely using the supplied adhesive strip either inside of the boot or behind the vehicle bumper. The front ECU mounts under the bonnet or inside of the car, typically behind the glove box. Dimensions of this compact rear sensor unit are just (L57mm x H13mm x D33mm) and the front sensor dimensions are (L75mm x H23mm x D40mm)

- The Antenna is a very strong and flexible adhesive metallic tape that mounts behind the bumper. Its 1cm height and 2.7m length gives you flexibility to run over bumper curves and round bumper mouldings and ensures 100% bumper coverage of even the largest vehicle, offering a full, all round protection zone. The antenna can be cut to any length in seconds.

- The Switch included with the PD1-Front only, mounts discretely inside of the vehicle typically under the steering wheel area for easy access. Press the push-button switch to activate the PD1-Front when parking.

- The LED Display included with the PD1-Vision only, mounts discretely on the rear view mirror and gives you visual and Skodable alerts to inform you of the proximity of surrounding objects. LED Display Dimensions (L90mm x H30mm x D12mm)

 Skoda Reverse Parking Dynamics PD1 Features:

• 100% Discrete! No visible parts, so only you will know it is fitted.
• Automatically beeps if you get to close to an object.
• Detects people, vehicles, small & high kerbs, garage doors, pillars, posts, walls, fences, barriers, skips, etc.
• Scans & Protects full length of bumper even onto sides unlike ultrasonic’s.
• Maintenance FREE!
• No-Drill, No-Damage! Fitted without drilling bumper unlike ultrasonic type parking sensors.
• 100% accurate, reliable and responsive in all parking situations and weather conditions.
• No Paint Required! Unlike ultrasonic type sensors.
• 2.7 Metre Adhesive antenna mounts on inner side of bumper and can be cut to fit any size of bumper.
• 100% Compatible with both conventional and the latest CAN Bus multiplex wiring systems.
• 3 Skodable Tones alert you of your proximity in relation to surrounding objects. PD1 Vision also has a display.
• Easy 3 wire installation.
• Compatible with vehicles that have a tow bar fitted or spare wheel fixed to rear door.
• Fits all vehicles with a plastic bumper including Cars, 4×4, MPV, SUV, Vans, Vehicles, Motor homes.
• Ideal for Rental and Leasing companies as no bumper adjustments are required.
• 2 Year Guarantee.
• High Performance Reverse Parking Sensor, Reverse Sensor, Reversing Sensor, Parking Aid!

Find out more about the Parking Dynamics PD1 Skoda Reverse Parking Sensor

Parking Dynamics PD1 Seat Parking & Reversing Sensors use a Unique, No Holes Design that is invisible when fitted. No Drill. No Holes. No Damage!

The Seat Parking Dynamics PD1 Reverse Parking Sensor uses a unique 100% Accurate, Responsive and Reliable Electromagnetic Sensor Technology that makes parking Safer and Easier, preventing Bumps, Scrapes and Nasty Bangs.

This reverse parking sensor technology is available as a Front and Rear reverse parking sensor giving your vehicle all round parking and reversing protection and giving you Total Parking and Reversing Confidence.

A Seat Reverse Parking sensor that fits all Cars, Vehicles, Vans, 4×4s, MPVs, SUVs & Motor Homes gives you total flexibility and optimum compatibility. The PD1 Detects all objects including People, Vehicles, Small & High Kerbs, Pillars, Posts, Walls, Fences, Barriers, Garage Doors, Skips, etc.

As recently reported by the insurance industry, 27% of vehicle accidents are now caused by driver error, when parking and reversing! With more cars on the road now than ever before, the Risk is even greater for accidents to occur. The Seat Parking Dynamics PD1 will give you peace-of-mind and total parking confidence.

Unique Design:

This unique adhesive metallic antenna design mounts discretely on the inner side of your plastic bumper preserving the ‘new factory look’ of your vehicle and maintains the sleek aesthetic lines of today’s prestige vehicles. Far superior in design and performance to the ultrasonic type of sensor that has ugly and visible sensors.

Totally unique in design, the Seat PD1 reverse parking sensor is a superior alternative to the older ultrasonic type sensor technology that requires you to drill 4 or 6 holes in your bumper, mounting ugly black sensors that then need painting to colour code and match the shade of your bumper… The Parking Dynamics PD1 makes this a thing of the past!

Find out more about the Parking Dynamics PD1 Seat Reverse Parking Sensor

 Technical Operation:

When reverse gear is selected the small control unit generates a magnetic field and transfers this to the transceiver adhesive strip that is placed on the inner side of and run the length of your bumper. The PD1 Front sensor is activated by a a switch and works in exactly the same way as the PD1 rear reverse sensor.

The magnetic strip then sends out an elliptical magnetic field to cover the full area around your bumper, front, rear and sides. The transceiver strip works by sending and receiving unlike ultrasonic parking and reverse sensors that require 2 types of sensors, one to send and one to receive; if they become dirty the ultrasonic performance can deteriorate.

Mass is then monitored by the control unit by translating this into a voltage. When an object (i.e. people, kerbs, cars, etc) heavier in mass than the magnetic field enters this elliptical zone, an increase in voltage is detected by the control unit and you are then informed by a series of Seatble tones or display (PD1-Vision only) how close you are to the object. You can then manoeuvre accordingly with plenty of time to react.

User Operation giving Full Bumper Coverage and Early Detection:

Using Electromagnetic Technology, the Seat PD1 reverse parking sensor will scan the full length of your bumper, from end to end picking up all objects behind your vehicle. The PD1 detects children, people, adults the elderly plus cars, vehicles, small kerbs, walls, barriers, pillars, posts, skips, etc. Whatever is behind you can rest assured the Seat PD1 will detect this object and alert you to its presence allowing you to react, with time to spare.

When reverse gear is engaged the reverse parking sensor system provides an instant, automatic, self-diagnostic function that maps out the surrounding area of your bumper constantly monitoring this as you reverse with 100% accuracy, providing you with 3 different Seatble tones (Zones) alerting you of your proximity in relation to surrounding objects!

As you reverse Zone 1 (furthest away from the object) picks up the object first.

Zone 1: 0.8 to 0.5 Metres in length - The 1st tone signals with a slow "be-be-be" sound

Zone 2: 0.5 to 0.25 Metres in length - The 2nd tone is a faster "be-be-be" sound

Zone 3: 0.25 to 0 Metres in length - the 3rd tone is a constant "beeeeeep" sound

 Seat Parking Dynamics PD1 Advantages Are Clear!

Parking Dynamics PD1 fits all Cars, Vehicles, Vans, 4×4s, MPVs, SUVs and Motor Homes giving you maximum compatibility, functionality, reliability and high performance accuracy.

The PD1 is flexible and allows you to move the sensor from vehicle to vehicle upon resale, for the minimum cost of a replacement antenna. No bumper adjustments make this ideal for Rental and Leasing companies.

No Visible Parts, Period! The Parking Dynamics PD1 when fitted is a completely discrete and totally invisible. Only you will know it’s fitted. This ensures a no-holes installation, a higher value to your car—and a more desirable car.

Being CAN bus compatible ensures the PD1 integrates seamlessly with both older conventional wiring systems and the latest intelligent (CAN Bus) multiplex wiring systems. Connect the wrong aftermarket reverse parking sensor and it could be costly. Parking Dynamics is the solution to this dilemma!

No-Drill! The PD1 is fitted without drilling your bumper and unlike ultrasonic type parking sensors there are NO ugly sensors to be mounted in your bumper and then painted. No need to match the paint colour.

A Maintenance FREE Front and Rear parking and reverse sensor technology - No Cleaning, No Adjustment and No Painting of sensors or Constant Testing required!

100% accurate, responsive and reliable in all parking situations and weather conditions - Regardless of the conditions: Sun, Rain, Wind, Snow or Hail the PD1 works and gives you accurate feedback in real time, every time.

Seat Reverse Parking sensors help and result in a major decrease in minor damage collisions caused when parking and reversing. This simple device will pay for itself many times over by reducing the number of small bangs in which you are involved. Completely eliminating the chance of putting your No Claims Bonus at risk!

Find out more about the Parking Dynamics PD1 Seat Reverse Parking Sensor

 The Seat Reverse Parking Dynamics PD1 System comprises of the following!

- The Speaker is small and at just 20mm in diameter mounts anywhere inside of the vehicle and can be run to any location. The Seatble tones that are emitted to alert you of the proximity of surrounding objects can be clearly heard even when mounted at the back of the vehicle close to or behind interior panels.

- The Electronic Control Unit (ECU) is the ‘brain’ of the PD1, and mounts securely using the supplied adhesive strip either inside of the boot or behind the vehicle bumper. The front ECU mounts under the bonnet or inside of the car, typically behind the glove box. Dimensions of this compact rear sensor unit are just (L57mm x H13mm x D33mm) and the front sensor dimensions are (L75mm x H23mm x D40mm)

- The Antenna is a very strong and flexible adhesive metallic tape that mounts behind the bumper. Its 1cm height and 2.7m length gives you flexibility to run over bumper curves and round bumper mouldings and ensures 100% bumper coverage of even the largest vehicle, offering a full, all round protection zone. The antenna can be cut to any length in seconds.

- The Switch included with the PD1-Front only, mounts discretely inside of the vehicle typically under the steering wheel area for easy access. Press the push-button switch to activate the PD1-Front when parking.

- The LED Display included with the PD1-Vision only, mounts discretely on the rear view mirror and gives you visual and Seatble alerts to inform you of the proximity of surrounding objects. LED Display Dimensions (L90mm x H30mm x D12mm)

 Seat Reverse Parking Dynamics PD1 Features:

• 100% Discrete! No visible parts, so only you will know it is fitted.
• Automatically beeps if you get to close to an object.
• Detects people, vehicles, small & high kerbs, garage doors, pillars, posts, walls, fences, barriers, skips, etc.
• Scans & Protects full length of bumper even onto sides unlike ultrasonic’s.
• Maintenance FREE!
• No-Drill, No-Damage! Fitted without drilling bumper unlike ultrasonic type parking sensors.
• 100% accurate, reliable and responsive in all parking situations and weather conditions.
• No Paint Required! Unlike ultrasonic type sensors.
• 2.7 Metre Adhesive antenna mounts on inner side of bumper and can be cut to fit any size of bumper.
• 100% Compatible with both conventional and the latest CAN Bus multiplex wiring systems.
• 3 Seatble Tones alert you of your proximity in relation to surrounding objects. PD1 Vision also has a display.
• Easy 3 wire installation.
• Compatible with vehicles that have a tow bar fitted or spare wheel fixed to rear door.
• Fits all vehicles with a plastic bumper including Cars, 4×4, MPV, SUV, Vans, Vehicles, Motor homes.
• Ideal for Rental and Leasing companies as no bumper adjustments are required.
• 2 Year Guarantee.
• High Performance Reverse Parking Sensor, Reverse Sensor, Reversing Sensor, Parking Aid!

Find out more about the Parking Dynamics PD1 Seat Reverse Parking Sensor

Parking Dynamics PD1 Saab Parking & Reversing Sensors use a Unique, No Holes Design that is invisible when fitted. No Drill. No Holes. No Damage!

The Saab Parking Dynamics PD1 Reverse Parking Sensor uses a unique 100% Accurate, Responsive and Reliable Electromagnetic Sensor Technology that makes parking Safer and Easier, preventing Bumps, Scrapes and Nasty Bangs.

This reverse parking sensor technology is available as a Front and Rear reverse parking sensor giving your vehicle all round parking and reversing protection and giving you Total Parking and Reversing Confidence.

A Saab Reverse Parking sensor that fits all Cars, Vehicles, Vans, 4×4s, MPVs, SUVs & Motor Homes gives you total flexibility and optimum compatibility. The PD1 Detects all objects including People, Vehicles, Small & High Kerbs, Pillars, Posts, Walls, Fences, Barriers, Garage Doors, Skips, etc.

As recently reported by the insurance industry, 27% of vehicle accidents are now caused by driver error, when parking and reversing! With more cars on the road now than ever before, the Risk is even greater for accidents to occur. The Saab Parking Dynamics PD1 will give you peace-of-mind and total parking confidence.

Unique Design:

This unique adhesive metallic antenna design mounts discretely on the inner side of your plastic bumper preserving the ‘new factory look’ of your vehicle and maintains the sleek aesthetic lines of today’s prestige vehicles. Far superior in design and performance to the ultrasonic type of sensor that has ugly and visible sensors.

Totally unique in design, the Saab PD1 reverse parking sensor is a superior alternative to the older ultrasonic type sensor technology that requires you to drill 4 or 6 holes in your bumper, mounting ugly black sensors that then need painting to colour code and match the shade of your bumper… The Parking Dynamics PD1 makes this a thing of the past!

Find out more about the Parking Dynamics PD1 Saab Reverse Parking Sensor

 Technical Operation:

When reverse gear is selected the small control unit generates a magnetic field and transfers this to the transceiver adhesive strip that is placed on the inner side of and run the length of your bumper. The PD1 Front sensor is activated by a a switch and works in exactly the same way as the PD1 rear reverse sensor.

The magnetic strip then sends out an elliptical magnetic field to cover the full area around your bumper, front, rear and sides. The transceiver strip works by sending and receiving unlike ultrasonic parking and reverse sensors that require 2 types of sensors, one to send and one to receive; if they become dirty the ultrasonic performance can deteriorate.

Mass is then monitored by the control unit by translating this into a voltage. When an object (i.e. people, kerbs, cars, etc) heavier in mass than the magnetic field enters this elliptical zone, an increase in voltage is detected by the control unit and you are then informed by a series of Saabble tones or display (PD1-Vision only) how close you are to the object. You can then manoeuvre accordingly with plenty of time to react.

User Operation giving Full Bumper Coverage and Early Detection:

Using Electromagnetic Technology, the Saab PD1 reverse parking sensor will scan the full length of your bumper, from end to end picking up all objects behind your vehicle. The PD1 detects children, people, adults the elderly plus cars, vehicles, small kerbs, walls, barriers, pillars, posts, skips, etc. Whatever is behind you can rest assured the Saab PD1 will detect this object and alert you to its presence allowing you to react, with time to spare.

When reverse gear is engaged the reverse parking sensor system provides an instant, automatic, self-diagnostic function that maps out the surrounding area of your bumper constantly monitoring this as you reverse with 100% accuracy, providing you with 3 different Saabble tones (Zones) alerting you of your proximity in relation to surrounding objects!

As you reverse Zone 1 (furthest away from the object) picks up the object first.

Zone 1: 0.8 to 0.5 Metres in length - The 1st tone signals with a slow "be-be-be" sound

Zone 2: 0.5 to 0.25 Metres in length - The 2nd tone is a faster "be-be-be" sound

Zone 3: 0.25 to 0 Metres in length - the 3rd tone is a constant "beeeeeep" sound

 Saab Parking Dynamics PD1 Advantages Are Clear!

Parking Dynamics PD1 fits all Cars, Vehicles, Vans, 4×4s, MPVs, SUVs and Motor Homes giving you maximum compatibility, functionality, reliability and high performance accuracy.

The PD1 is flexible and allows you to move the sensor from vehicle to vehicle upon resale, for the minimum cost of a replacement antenna. No bumper adjustments make this ideal for Rental and Leasing companies.

No Visible Parts, Period! The Parking Dynamics PD1 when fitted is a completely discrete and totally invisible. Only you will know it’s fitted. This ensures a no-holes installation, a higher value to your car—and a more desirable car.

Being CAN bus compatible ensures the PD1 integrates seamlessly with both older conventional wiring systems and the latest intelligent (CAN Bus) multiplex wiring systems. Connect the wrong aftermarket reverse parking sensor and it could be costly. Parking Dynamics is the solution to this dilemma!

No-Drill! The PD1 is fitted without drilling your bumper and unlike ultrasonic type parking sensors there are NO ugly sensors to be mounted in your bumper and then painted. No need to match the paint colour.

A Maintenance FREE Front and Rear parking and reverse sensor technology - No Cleaning, No Adjustment and No Painting of sensors or Constant Testing required!

100% accurate, responsive and reliable in all parking situations and weather conditions - Regardless of the conditions: Sun, Rain, Wind, Snow or Hail the PD1 works and gives you accurate feedback in real time, every time.

Saab Reverse Parking sensors help and result in a major decrease in minor damage collisions caused when parking and reversing. This simple device will pay for itself many times over by reducing the number of small bangs in which you are involved. Completely eliminating the chance of putting your No Claims Bonus at risk!

Find out more about the Parking Dynamics PD1 Saab Reverse Parking Sensor

 The Saab Reverse Parking Dynamics PD1 System comprises of the following!

- The Speaker is small and at just 20mm in diameter mounts anywhere inside of the vehicle and can be run to any location. The Saabble tones that are emitted to alert you of the proximity of surrounding objects can be clearly heard even when mounted at the back of the vehicle close to or behind interior panels.

- The Electronic Control Unit (ECU) is the ‘brain’ of the PD1, and mounts securely using the supplied adhesive strip either inside of the boot or behind the vehicle bumper. The front ECU mounts under the bonnet or inside of the car, typically behind the glove box. Dimensions of this compact rear sensor unit are just (L57mm x H13mm x D33mm) and the front sensor dimensions are (L75mm x H23mm x D40mm)

- The Antenna is a very strong and flexible adhesive metallic tape that mounts behind the bumper. Its 1cm height and 2.7m length gives you flexibility to run over bumper curves and round bumper mouldings and ensures 100% bumper coverage of even the largest vehicle, offering a full, all round protection zone. The antenna can be cut to any length in seconds.

- The Switch included with the PD1-Front only, mounts discretely inside of the vehicle typically under the steering wheel area for easy access. Press the push-button switch to activate the PD1-Front when parking.

- The LED Display included with the PD1-Vision only, mounts discretely on the rear view mirror and gives you visual and Saabble alerts to inform you of the proximity of surrounding objects. LED Display Dimensions (L90mm x H30mm x D12mm)

 Saab Reverse Parking Dynamics PD1 Features:

• 100% Discrete! No visible parts, so only you will know it is fitted.
• Automatically beeps if you get to close to an object.
• Detects people, vehicles, small & high kerbs, garage doors, pillars, posts, walls, fences, barriers, skips, etc.
• Scans & Protects full length of bumper even onto sides unlike ultrasonic’s.
• Maintenance FREE!
• No-Drill, No-Damage! Fitted without drilling bumper unlike ultrasonic type parking sensors.
• 100% accurate, reliable and responsive in all parking situations and weather conditions.
• No Paint Required! Unlike ultrasonic type sensors.
• 2.7 Metre Adhesive antenna mounts on inner side of bumper and can be cut to fit any size of bumper.
• 100% Compatible with both conventional and the latest CAN Bus multiplex wiring systems.
• 3 Saabble Tones alert you of your proximity in relation to surrounding objects. PD1 Vision also has a display.
• Easy 3 wire installation.
• Compatible with vehicles that have a tow bar fitted or spare wheel fixed to rear door.
• Fits all vehicles with a plastic bumper including Cars, 4×4, MPV, SUV, Vans, Vehicles, Motor homes.
• Ideal for Rental and Leasing companies as no bumper adjustments are required.
• 2 Year Guarantee.
• High Performance Reverse Parking Sensor, Reverse Sensor, Reversing Sensor, Parking Aid!

Find out more about the Parking Dynamics PD1 Saab Reverse Parking Sensor

Parking Dynamics PD1 Rover Parking & Reversing Sensors use a Unique, No Holes Design that is invisible when fitted. No Drill. No Holes. No Damage!

The Rover Parking Dynamics PD1 Reverse Parking Sensor uses a unique 100% Accurate, Responsive and Reliable Electromagnetic Sensor Technology that makes parking Safer and Easier, preventing Bumps, Scrapes and Nasty Bangs.

This reverse parking sensor technology is available as a Front and Rear reverse parking sensor giving your vehicle all round parking and reversing protection and giving you Total Parking and Reversing Confidence.

A Rover Reverse Parking sensor that fits all Cars, Vehicles, Vans, 4×4s, MPVs, SUVs & Motor Homes gives you total flexibility and optimum compatibility. The PD1 Detects all objects including People, Vehicles, Small & High Kerbs, Pillars, Posts, Walls, Fences, Barriers, Garage Doors, Skips, etc.

As recently reported by the insurance industry, 27% of vehicle accidents are now caused by driver error, when parking and reversing! With more cars on the road now than ever before, the Risk is even greater for accidents to occur. The Rover Parking Dynamics PD1 will give you peace-of-mind and total parking confidence.

Unique Design:

This unique adhesive metallic antenna design mounts discretely on the inner side of your plastic bumper preserving the ‘new factory look’ of your vehicle and maintains the sleek aesthetic lines of today’s prestige vehicles. Far superior in design and performance to the ultrasonic type of sensor that has ugly and visible sensors.

Totally unique in design, the Rover PD1 reverse parking sensor is a superior alternative to the older ultrasonic type sensor technology that requires you to drill 4 or 6 holes in your bumper, mounting ugly black sensors that then need painting to colour code and match the shade of your bumper… The Parking Dynamics PD1 makes this a thing of the past!

Find out more about the Parking Dynamics PD1 Rover Reverse Parking Sensor

 Technical Operation:

When reverse gear is selected the small control unit generates a magnetic field and transfers this to the transceiver adhesive strip that is placed on the inner side of and run the length of your bumper. The PD1 Front sensor is activated by a a switch and works in exactly the same way as the PD1 rear reverse sensor.

The magnetic strip then sends out an elliptical magnetic field to cover the full area around your bumper, front, rear and sides. The transceiver strip works by sending and receiving unlike ultrasonic parking and reverse sensors that require 2 types of sensors, one to send and one to receive; if they become dirty the ultrasonic performance can deteriorate.

Mass is then monitored by the control unit by translating this into a voltage. When an object (i.e. people, kerbs, cars, etc) heavier in mass than the magnetic field enters this elliptical zone, an increase in voltage is detected by the control unit and you are then informed by a series of Roverble tones or display (PD1-Vision only) how close you are to the object. You can then manoeuvre accordingly with plenty of time to react.

User Operation giving Full Bumper Coverage and Early Detection:

Using Electromagnetic Technology, the Rover PD1 reverse parking sensor will scan the full length of your bumper, from end to end picking up all objects behind your vehicle. The PD1 detects children, people, adults the elderly plus cars, vehicles, small kerbs, walls, barriers, pillars, posts, skips, etc. Whatever is behind you can rest assured the Rover PD1 will detect this object and alert you to its presence allowing you to react, with time to spare.

When reverse gear is engaged the reverse parking sensor system provides an instant, automatic, self-diagnostic function that maps out the surrounding area of your bumper constantly monitoring this as you reverse with 100% accuracy, providing you with 3 different Roverble tones (Zones) alerting you of your proximity in relation to surrounding objects!

As you reverse Zone 1 (furthest away from the object) picks up the object first.

Zone 1: 0.8 to 0.5 Metres in length - The 1st tone signals with a slow "be-be-be" sound

Zone 2: 0.5 to 0.25 Metres in length - The 2nd tone is a faster "be-be-be" sound

Zone 3: 0.25 to 0 Metres in length - the 3rd tone is a constant "beeeeeep" sound

 Rover Parking Dynamics PD1 Advantages Are Clear!

Parking Dynamics PD1 fits all Cars, Vehicles, Vans, 4×4s, MPVs, SUVs and Motor Homes giving you maximum compatibility, functionality, reliability and high performance accuracy.

The PD1 is flexible and allows you to move the sensor from vehicle to vehicle upon resale, for the minimum cost of a replacement antenna. No bumper adjustments make this ideal for Rental and Leasing companies.

No Visible Parts, Period! The Parking Dynamics PD1 when fitted is a completely discrete and totally invisible. Only you will know it’s fitted. This ensures a no-holes installation, a higher value to your car—and a more desirable car.

Being CAN bus compatible ensures the PD1 integrates seamlessly with both older conventional wiring systems and the latest intelligent (CAN Bus) multiplex wiring systems. Connect the wrong aftermarket reverse parking sensor and it could be costly. Parking Dynamics is the solution to this dilemma!

No-Drill! The PD1 is fitted without drilling your bumper and unlike ultrasonic type parking sensors there are NO ugly sensors to be mounted in your bumper and then painted. No need to match the paint colour.

A Maintenance FREE Front and Rear parking and reverse sensor technology - No Cleaning, No Adjustment and No Painting of sensors or Constant Testing required!

100% accurate, responsive and reliable in all parking situations and weather conditions - Regardless of the conditions: Sun, Rain, Wind, Snow or Hail the PD1 works and gives you accurate feedback in real time, every time.

Rover Reverse Parking sensors help and result in a major decrease in minor damage collisions caused when parking and reversing. This simple device will pay for itself many times over by reducing the number of small bangs in which you are involved. Completely eliminating the chance of putting your No Claims Bonus at risk!

Find out more about the Parking Dynamics PD1 Rover Reverse Parking Sensor

 The Rover Reverse Parking Dynamics PD1 System comprises of the following!

- The Speaker is small and at just 20mm in diameter mounts anywhere inside of the vehicle and can be run to any location. The Roverble tones that are emitted to alert you of the proximity of surrounding objects can be clearly heard even when mounted at the back of the vehicle close to or behind interior panels.

- The Electronic Control Unit (ECU) is the ‘brain’ of the PD1, and mounts securely using the supplied adhesive strip either inside of the boot or behind the vehicle bumper. The front ECU mounts under the bonnet or inside of the car, typically behind the glove box. Dimensions of this compact rear sensor unit are just (L57mm x H13mm x D33mm) and the front sensor dimensions are (L75mm x H23mm x D40mm)

- The Antenna is a very strong and flexible adhesive metallic tape that mounts behind the bumper. Its 1cm height and 2.7m length gives you flexibility to run over bumper curves and round bumper mouldings and ensures 100% bumper coverage of even the largest vehicle, offering a full, all round protection zone. The antenna can be cut to any length in seconds.

- The Switch included with the PD1-Front only, mounts discretely inside of the vehicle typically under the steering wheel area for easy access. Press the push-button switch to activate the PD1-Front when parking.

- The LED Display included with the PD1-Vision only, mounts discretely on the rear view mirror and gives you visual and Roverble alerts to inform you of the proximity of surrounding objects. LED Display Dimensions (L90mm x H30mm x D12mm)

 Rover Reverse Parking Dynamics PD1 Features:

• 100% Discrete! No visible parts, so only you will know it is fitted.
• Automatically beeps if you get to close to an object.
• Detects people, vehicles, small & high kerbs, garage doors, pillars, posts, walls, fences, barriers, skips, etc.
• Scans & Protects full length of bumper even onto sides unlike ultrasonic’s.
• Maintenance FREE!
• No-Drill, No-Damage! Fitted without drilling bumper unlike ultrasonic type parking sensors.
• 100% accurate, reliable and responsive in all parking situations and weather conditions.
• No Paint Required! Unlike ultrasonic type sensors.
• 2.7 Metre Adhesive antenna mounts on inner side of bumper and can be cut to fit any size of bumper.
• 100% Compatible with both conventional and the latest CAN Bus multiplex wiring systems.
• 3 Roverble Tones alert you of your proximity in relation to surrounding objects. PD1 Vision also has a display.
• Easy 3 wire installation.
• Compatible with vehicles that have a tow bar fitted or spare wheel fixed to rear door.
• Fits all vehicles with a plastic bumper including Cars, 4×4, MPV, SUV, Vans, Vehicles, Motor homes.
• Ideal for Rental and Leasing companies as no bumper adjustments are required.
• 2 Year Guarantee.
• High Performance Reverse Parking Sensor, Reverse Sensor, Reversing Sensor, Parking Aid!

Find out more about the Parking Dynamics PD1 Rover Reverse Parking Sensor

Parking Dynamics PD1 Rolls Royce Parking & Reversing Sensors use a Unique, No Holes Design that is invisible when fitted. No Drill. No Holes. No Damage!

The Rolls Royce Parking Dynamics PD1 Reverse Parking Sensor uses a unique 100% Accurate, Responsive and Reliable Electromagnetic Sensor Technology that makes parking Safer and Easier, preventing Bumps, Scrapes and Nasty Bangs.

This reverse parking sensor technology is available as a Front and Rear reverse parking sensor giving your vehicle all round parking and reversing protection and giving you Total Parking and Reversing Confidence.

A Rolls Royce Reverse Parking sensor that fits all Cars, Vehicles, Vans, 4×4s, MPVs, SUVs & Motor Homes gives you total flexibility and optimum compatibility. The PD1 Detects all objects including People, Vehicles, Small & High Kerbs, Pillars, Posts, Walls, Fences, Barriers, Garage Doors, Skips, etc.

As recently reported by the insurance industry, 27% of vehicle accidents are now caused by driver error, when parking and reversing! With more cars on the road now than ever before, the Risk is even greater for accidents to occur. The Rolls Royce Parking Dynamics PD1 will give you peace-of-mind and total parking confidence.

Unique Design:

This unique adhesive metallic antenna design mounts discretely on the inner side of your plastic bumper preserving the ‘new factory look’ of your vehicle and maintains the sleek aesthetic lines of today’s prestige vehicles. Far superior in design and performance to the ultrasonic type of sensor that has ugly and visible sensors.

Totally unique in design, the Rolls Royce PD1 reverse parking sensor is a superior alternative to the older ultrasonic type sensor technology that requires you to drill 4 or 6 holes in your bumper, mounting ugly black sensors that then need painting to colour code and match the shade of your bumper… The Parking Dynamics PD1 makes this a thing of the past!

Find out more about the Parking Dynamics PD1 Rolls Royce Reverse Parking Sensor

 Technical Operation:

When reverse gear is selected the small control unit generates a magnetic field and transfers this to the transceiver adhesive strip that is placed on the inner side of and run the length of your bumper. The PD1 Front sensor is activated by a a switch and works in exactly the same way as the PD1 rear reverse sensor.

The magnetic strip then sends out an elliptical magnetic field to cover the full area around your bumper, front, rear and sides. The transceiver strip works by sending and receiving unlike ultrasonic parking and reverse sensors that require 2 types of sensors, one to send and one to receive; if they become dirty the ultrasonic performance can deteriorate.

Mass is then monitored by the control unit by translating this into a voltage. When an object (i.e. people, kerbs, cars, etc) heavier in mass than the magnetic field enters this elliptical zone, an increase in voltage is detected by the control unit and you are then informed by a series of Rolls Royceble tones or display (PD1-Vision only) how close you are to the object. You can then manoeuvre accordingly with plenty of time to react.

User Operation giving Full Bumper Coverage and Early Detection:

Using Electromagnetic Technology, the Rolls Royce PD1 reverse parking sensor will scan the full length of your bumper, from end to end picking up all objects behind your vehicle. The PD1 detects children, people, adults the elderly plus cars, vehicles, small kerbs, walls, barriers, pillars, posts, skips, etc. Whatever is behind you can rest assured the Rolls Royce PD1 will detect this object and alert you to its presence allowing you to react, with time to spare.

When reverse gear is engaged the reverse parking sensor system provides an instant, automatic, self-diagnostic function that maps out the surrounding area of your bumper constantly monitoring this as you reverse with 100% accuracy, providing you with 3 different Rolls Royceble tones (Zones) alerting you of your proximity in relation to surrounding objects!

As you reverse Zone 1 (furthest away from the object) picks up the object first.

Zone 1: 0.8 to 0.5 Metres in length - The 1st tone signals with a slow "be-be-be" sound

Zone 2: 0.5 to 0.25 Metres in length - The 2nd tone is a faster "be-be-be" sound

Zone 3: 0.25 to 0 Metres in length - the 3rd tone is a constant "beeeeeep" sound

 Rolls Royce Parking Dynamics PD1 Advantages Are Clear!

Parking Dynamics PD1 fits all Cars, Vehicles, Vans, 4×4s, MPVs, SUVs and Motor Homes giving you maximum compatibility, functionality, reliability and high performance accuracy.

The PD1 is flexible and allows you to move the sensor from vehicle to vehicle upon resale, for the minimum cost of a replacement antenna. No bumper adjustments make this ideal for Rental and Leasing companies.

No Visible Parts, Period! The Parking Dynamics PD1 when fitted is a completely discrete and totally invisible. Only you will know it’s fitted. This ensures a no-holes installation, a higher value to your car—and a more desirable car.

Being CAN bus compatible ensures the PD1 integrates seamlessly with both older conventional wiring systems and the latest intelligent (CAN Bus) multiplex wiring systems. Connect the wrong aftermarket reverse parking sensor and it could be costly. Parking Dynamics is the solution to this dilemma!

No-Drill! The PD1 is fitted without drilling your bumper and unlike ultrasonic type parking sensors there are NO ugly sensors to be mounted in your bumper and then painted. No need to match the paint colour.

A Maintenance FREE Front and Rear parking and reverse sensor technology - No Cleaning, No Adjustment and No Painting of sensors or Constant Testing required!

100% accurate, responsive and reliable in all parking situations and weather conditions - Regardless of the conditions: Sun, Rain, Wind, Snow or Hail the PD1 works and gives you accurate feedback in real time, every time.

Rolls Royce Reverse Parking sensors help and result in a major decrease in minor damage collisions caused when parking and reversing. This simple device will pay for itself many times over by reducing the number of small bangs in which you are involved. Completely eliminating the chance of putting your No Claims Bonus at risk!

Find out more about the Parking Dynamics PD1 Rolls Royce Reverse Parking Sensor

 The Rolls Royce Reverse Parking Dynamics PD1 System comprises of the following!

- The Speaker is small and at just 20mm in diameter mounts anywhere inside of the vehicle and can be run to any location. The Rolls Royceble tones that are emitted to alert you of the proximity of surrounding objects can be clearly heard even when mounted at the back of the vehicle close to or behind interior panels.

- The Electronic Control Unit (ECU) is the ‘brain’ of the PD1, and mounts securely using the supplied adhesive strip either inside of the boot or behind the vehicle bumper. The front ECU mounts under the bonnet or inside of the car, typically behind the glove box. Dimensions of this compact rear sensor unit are just (L57mm x H13mm x D33mm) and the front sensor dimensions are (L75mm x H23mm x D40mm)

- The Antenna is a very strong and flexible adhesive metallic tape that mounts behind the bumper. Its 1cm height and 2.7m length gives you flexibility to run over bumper curves and round bumper mouldings and ensures 100% bumper coverage of even the largest vehicle, offering a full, all round protection zone. The antenna can be cut to any length in seconds.

- The Switch included with the PD1-Front only, mounts discretely inside of the vehicle typically under the steering wheel area for easy access. Press the push-button switch to activate the PD1-Front when parking.

- The LED Display included with the PD1-Vision only, mounts discretely on the rear view mirror and gives you visual and Rolls Royceble alerts to inform you of the proximity of surrounding objects. LED Display Dimensions (L90mm x H30mm x D12mm)

 Rolls Royce Reverse Parking Dynamics PD1 Features:

• 100% Discrete! No visible parts, so only you will know it is fitted.
• Automatically beeps if you get to close to an object.
• Detects people, vehicles, small & high kerbs, garage doors, pillars, posts, walls, fences, barriers, skips, etc.
• Scans & Protects full length of bumper even onto sides unlike ultrasonic’s.
• Maintenance FREE!
• No-Drill, No-Damage! Fitted without drilling bumper unlike ultrasonic type parking sensors.
• 100% accurate, reliable and responsive in all parking situations and weather conditions.
• No Paint Required! Unlike ultrasonic type sensors.
• 2.7 Metre Adhesive antenna mounts on inner side of bumper and can be cut to fit any size of bumper.
• 100% Compatible with both conventional and the latest CAN Bus multiplex wiring systems.
• 3 Rolls Royceble Tones alert you of your proximity in relation to surrounding objects. PD1 Vision also has a display.
• Easy 3 wire installation.
• Compatible with vehicles that have a tow bar fitted or spare wheel fixed to rear door.
• Fits all vehicles with a plastic bumper including Cars, 4×4, MPV, SUV, Vans, Vehicles, Motor homes.
• Ideal for Rental and Leasing companies as no bumper adjustments are required.
• 2 Year Guarantee.
• High Performance Reverse Parking Sensor, Reverse Sensor, Reversing Sensor, Parking Aid!

Find out more about the Parking Dynamics PD1 Rolls Royce Reverse Parking Sensor

Parking Dynamics PD1 Renault Parking & Reversing Sensors use a Unique, No Holes Design that is invisible when fitted. No Drill. No Holes. No Damage!

The Renault Parking Dynamics PD1 Reverse Parking Sensor uses a unique 100% Accurate, Responsive and Reliable Electromagnetic Sensor Technology that makes parking Safer and Easier, preventing Bumps, Scrapes and Nasty Bangs.

This reverse parking sensor technology is available as a Front and Rear reverse parking sensor giving your vehicle all round parking and reversing protection and giving you Total Parking and Reversing Confidence.

A Renault Reverse Parking sensor that fits all Cars, Vehicles, Vans, 4×4s, MPVs, SUVs & Motor Homes gives you total flexibility and optimum compatibility. The PD1 Detects all objects including People, Vehicles, Small & High Kerbs, Pillars, Posts, Walls, Fences, Barriers, Garage Doors, Skips, etc.

As recently reported by the insurance industry, 27% of vehicle accidents are now caused by driver error, when parking and reversing! With more cars on the road now than ever before, the Risk is even greater for accidents to occur. The Renault Parking Dynamics PD1 will give you peace-of-mind and total parking confidence.

Unique Design:

This unique adhesive metallic antenna design mounts discretely on the inner side of your plastic bumper preserving the ‘new factory look’ of your vehicle and maintains the sleek aesthetic lines of today’s prestige vehicles. Far superior in design and performance to the ultrasonic type of sensor that has ugly and visible sensors.

Totally unique in design, the Renault PD1 reverse parking sensor is a superior alternative to the older ultrasonic type sensor technology that requires you to drill 4 or 6 holes in your bumper, mounting ugly black sensors that then need painting to colour code and match the shade of your bumper… The Parking Dynamics PD1 makes this a thing of the past!

Find out more about the Parking Dynamics PD1 Renault Reverse Parking Sensor

 Technical Operation:

When reverse gear is selected the small control unit generates a magnetic field and transfers this to the transceiver adhesive strip that is placed on the inner side of and run the length of your bumper. The PD1 Front sensor is activated by a a switch and works in exactly the same way as the PD1 rear reverse sensor.

The magnetic strip then sends out an elliptical magnetic field to cover the full area around your bumper, front, rear and sides. The transceiver strip works by sending and receiving unlike ultrasonic parking and reverse sensors that require 2 types of sensors, one to send and one to receive; if they become dirty the ultrasonic performance can deteriorate.

Mass is then monitored by the control unit by translating this into a voltage. When an object (i.e. people, kerbs, cars, etc) heavier in mass than the magnetic field enters this elliptical zone, an increase in voltage is detected by the control unit and you are then informed by a series of Renaultble tones or display (PD1-Vision only) how close you are to the object. You can then manoeuvre accordingly with plenty of time to react.

User Operation giving Full Bumper Coverage and Early Detection:

Using Electromagnetic Technology, the Renault PD1 reverse parking sensor will scan the full length of your bumper, from end to end picking up all objects behind your vehicle. The PD1 detects children, people, adults the elderly plus cars, vehicles, small kerbs, walls, barriers, pillars, posts, skips, etc. Whatever is behind you can rest assured the Renault PD1 will detect this object and alert you to its presence allowing you to react, with time to spare.

When reverse gear is engaged the reverse parking sensor system provides an instant, automatic, self-diagnostic function that maps out the surrounding area of your bumper constantly monitoring this as you reverse with 100% accuracy, providing you with 3 different Renaultble tones (Zones) alerting you of your proximity in relation to surrounding objects!

As you reverse Zone 1 (furthest away from the object) picks up the object first.

Zone 1: 0.8 to 0.5 Metres in length - The 1st tone signals with a slow "be-be-be" sound

Zone 2: 0.5 to 0.25 Metres in length - The 2nd tone is a faster "be-be-be" sound

Zone 3: 0.25 to 0 Metres in length - the 3rd tone is a constant "beeeeeep" sound

 Renault Parking Dynamics PD1 Advantages Are Clear!

Parking Dynamics PD1 fits all Cars, Vehicles, Vans, 4×4s, MPVs, SUVs and Motor Homes giving you maximum compatibility, functionality, reliability and high performance accuracy.

The PD1 is flexible and allows you to move the sensor from vehicle to vehicle upon resale, for the minimum cost of a replacement antenna. No bumper adjustments make this ideal for Rental and Leasing companies.

No Visible Parts, Period! The Parking Dynamics PD1 when fitted is a completely discrete and totally invisible. Only you will know it’s fitted. This ensures a no-holes installation, a higher value to your car—and a more desirable car.

Being CAN bus compatible ensures the PD1 integrates seamlessly with both older conventional wiring systems and the latest intelligent (CAN Bus) multiplex wiring systems. Connect the wrong aftermarket reverse parking sensor and it could be costly. Parking Dynamics is the solution to this dilemma!

No-Drill! The PD1 is fitted without drilling your bumper and unlike ultrasonic type parking sensors there are NO ugly sensors to be mounted in your bumper and then painted. No need to match the paint colour.

A Maintenance FREE Front and Rear parking and reverse sensor technology - No Cleaning, No Adjustment and No Painting of sensors or Constant Testing required!

100% accurate, responsive and reliable in all parking situations and weather conditions - Regardless of the conditions: Sun, Rain, Wind, Snow or Hail the PD1 works and gives you accurate feedback in real time, every time.

Renault Reverse Parking sensors help and result in a major decrease in minor damage collisions caused when parking and reversing. This simple device will pay for itself many times over by reducing the number of small bangs in which you are involved. Completely eliminating the chance of putting your No Claims Bonus at risk!

Find out more about the Parking Dynamics PD1 Renault Reverse Parking Sensor

 The Renault Reverse Parking Dynamics PD1 System comprises of the following!

- The Speaker is small and at just 20mm in diameter mounts anywhere inside of the vehicle and can be run to any location. The Renaultble tones that are emitted to alert you of the proximity of surrounding objects can be clearly heard even when mounted at the back of the vehicle close to or behind interior panels.

- The Electronic Control Unit (ECU) is the ‘brain’ of the PD1, and mounts securely using the supplied adhesive strip either inside of the boot or behind the vehicle bumper. The front ECU mounts under the bonnet or inside of the car, typically behind the glove box. Dimensions of this compact rear sensor unit are just (L57mm x H13mm x D33mm) and the front sensor dimensions are (L75mm x H23mm x D40mm)

- The Antenna is a very strong and flexible adhesive metallic tape that mounts behind the bumper. Its 1cm height and 2.7m length gives you flexibility to run over bumper curves and round bumper mouldings and ensures 100% bumper coverage of even the largest vehicle, offering a full, all round protection zone. The antenna can be cut to any length in seconds.

- The Switch included with the PD1-Front only, mounts discretely inside of the vehicle typically under the steering wheel area for easy access. Press the push-button switch to activate the PD1-Front when parking.

- The LED Display included with the PD1-Vision only, mounts discretely on the rear view mirror and gives you visual and Renaultble alerts to inform you of the proximity of surrounding objects. LED Display Dimensions (L90mm x H30mm x D12mm)

 Renault Reverse Parking Dynamics PD1 Features:

• 100% Discrete! No visible parts, so only you will know it is fitted.
• Automatically beeps if you get to close to an object.
• Detects people, vehicles, small & high kerbs, garage doors, pillars, posts, walls, fences, barriers, skips, etc.
• Scans & Protects full length of bumper even onto sides unlike ultrasonic’s.
• Maintenance FREE!
• No-Drill, No-Damage! Fitted without drilling bumper unlike ultrasonic type parking sensors.
• 100% accurate, reliable and responsive in all parking situations and weather conditions.
• No Paint Required! Unlike ultrasonic type sensors.
• 2.7 Metre Adhesive antenna mounts on inner side of bumper and can be cut to fit any size of bumper.
• 100% Compatible with both conventional and the latest CAN Bus multiplex wiring systems.
• 3 Renaultble Tones alert you of your proximity in relation to surrounding objects. PD1 Vision also has a display.
• Easy 3 wire installation.
• Compatible with vehicles that have a tow bar fitted or spare wheel fixed to rear door.
• Fits all vehicles with a plastic bumper including Cars, 4×4, MPV, SUV, Vans, Vehicles, Motor homes.
• Ideal for Rental and Leasing companies as no bumper adjustments are required.
• 2 Year Guarantee.
• High Performance Reverse Parking Sensor, Reverse Sensor, Reversing Sensor, Parking Aid!

Find out more about the Parking Dynamics PD1 Renault Reverse Parking Sensor

Parking Dynamics PD1 Range Rover Parking & Reversing Sensors use a Unique, No Holes Design that is invisible when fitted. No Drill. No Holes. No Damage!

The Range Rover Parking Dynamics PD1 Reverse Parking Sensor uses a unique 100% Accurate, Responsive and Reliable Electromagnetic Sensor Technology that makes parking Safer and Easier, preventing Bumps, Scrapes and Nasty Bangs.

This reverse parking sensor technology is available as a Front and Rear reverse parking sensor giving your vehicle all round parking and reversing protection and giving you Total Parking and Reversing Confidence.

A Range Rover Reverse Parking sensor that fits all Cars, Vehicles, Vans, 4×4s, MPVs, SUVs & Motor Homes gives you total flexibility and optimum compatibility. The PD1 Detects all objects including People, Vehicles, Small & High Kerbs, Pillars, Posts, Walls, Fences, Barriers, Garage Doors, Skips, etc.

As recently reported by the insurance industry, 27% of vehicle accidents are now caused by driver error, when parking and reversing! With more cars on the road now than ever before, the Risk is even greater for accidents to occur. The Range Rover Parking Dynamics PD1 will give you peace-of-mind and total parking confidence.

Unique Design:

This unique adhesive metallic antenna design mounts discretely on the inner side of your plastic bumper preserving the ‘new factory look’ of your vehicle and maintains the sleek aesthetic lines of today’s prestige vehicles. Far superior in design and performance to the ultrasonic type of sensor that has ugly and visible sensors.

Totally unique in design, the Range Rover PD1 reverse parking sensor is a superior alternative to the older ultrasonic type sensor technology that requires you to drill 4 or 6 holes in your bumper, mounting ugly black sensors that then need painting to colour code and match the shade of your bumper… The Parking Dynamics PD1 makes this a thing of the past!

Find out more about the Parking Dynamics PD1 Range Rover Reverse Parking Sensor

 Technical Operation:

When reverse gear is selected the small control unit generates a magnetic field and transfers this to the transceiver adhesive strip that is placed on the inner side of and run the length of your bumper. The PD1 Front sensor is activated by a a switch and works in exactly the same way as the PD1 rear reverse sensor.

The magnetic strip then sends out an elliptical magnetic field to cover the full area around your bumper, front, rear and sides. The transceiver strip works by sending and receiving unlike ultrasonic parking and reverse sensors that require 2 types of sensors, one to send and one to receive; if they become dirty the ultrasonic performance can deteriorate.

Mass is then monitored by the control unit by translating this into a voltage. When an object (i.e. people, kerbs, cars, etc) heavier in mass than the magnetic field enters this elliptical zone, an increase in voltage is detected by the control unit and you are then informed by a series of Range Roverble tones or display (PD1-Vision only) how close you are to the object. You can then manoeuvre accordingly with plenty of time to react.

User Operation giving Full Bumper Coverage and Early Detection:

Using Electromagnetic Technology, the Range Rover PD1 reverse parking sensor will scan the full length of your bumper, from end to end picking up all objects behind your vehicle. The PD1 detects children, people, adults the elderly plus cars, vehicles, small kerbs, walls, barriers, pillars, posts, skips, etc. Whatever is behind you can rest assured the Range Rover PD1 will detect this object and alert you to its presence allowing you to react, with time to spare.

When reverse gear is engaged the reverse parking sensor system provides an instant, automatic, self-diagnostic function that maps out the surrounding area of your bumper constantly monitoring this as you reverse with 100% accuracy, providing you with 3 different Range Roverble tones (Zones) alerting you of your proximity in relation to surrounding objects!

As you reverse Zone 1 (furthest away from the object) picks up the object first.

Zone 1: 0.8 to 0.5 Metres in length - The 1st tone signals with a slow "be-be-be" sound

Zone 2: 0.5 to 0.25 Metres in length - The 2nd tone is a faster "be-be-be" sound

Zone 3: 0.25 to 0 Metres in length - the 3rd tone is a constant "beeeeeep" sound

 Range Rover Parking Dynamics PD1 Advantages Are Clear!

Parking Dynamics PD1 fits all Cars, Vehicles, Vans, 4×4s, MPVs, SUVs and Motor Homes giving you maximum compatibility, functionality, reliability and high performance accuracy.

The PD1 is flexible and allows you to move the sensor from vehicle to vehicle upon resale, for the minimum cost of a replacement antenna. No bumper adjustments make this ideal for Rental and Leasing companies.

No Visible Parts, Period! The Parking Dynamics PD1 when fitted is a completely discrete and totally invisible. Only you will know it’s fitted. This ensures a no-holes installation, a higher value to your car—and a more desirable car.

Being CAN bus compatible ensures the PD1 integrates seamlessly with both older conventional wiring systems and the latest intelligent (CAN Bus) multiplex wiring systems. Connect the wrong aftermarket reverse parking sensor and it could be costly. Parking Dynamics is the solution to this dilemma!

No-Drill! The PD1 is fitted without drilling your bumper and unlike ultrasonic type parking sensors there are NO ugly sensors to be mounted in your bumper and then painted. No need to match the paint colour.

A Maintenance FREE Front and Rear parking and reverse sensor technology - No Cleaning, No Adjustment and No Painting of sensors or Constant Testing required!

100% accurate, responsive and reliable in all parking situations and weather conditions - Regardless of the conditions: Sun, Rain, Wind, Snow or Hail the PD1 works and gives you accurate feedback in real time, every time.

Range Rover Reverse Parking sensors help and result in a major decrease in minor damage collisions caused when parking and reversing. This simple device will pay for itself many times over by reducing the number of small bangs in which you are involved. Completely eliminating the chance of putting your No Claims Bonus at risk!

Find out more about the Parking Dynamics PD1 Range Rover Reverse Parking Sensor

 The Range Rover Reverse Parking Dynamics PD1 System comprises of the following!

- The Speaker is small and at just 20mm in diameter mounts anywhere inside of the vehicle and can be run to any location. The Range Roverble tones that are emitted to alert you of the proximity of surrounding objects can be clearly heard even when mounted at the back of the vehicle close to or behind interior panels.

- The Electronic Control Unit (ECU) is the ‘brain’ of the PD1, and mounts securely using the supplied adhesive strip either inside of the boot or behind the vehicle bumper. The front ECU mounts under the bonnet or inside of the car, typically behind the glove box. Dimensions of this compact rear sensor unit are just (L57mm x H13mm x D33mm) and the front sensor dimensions are (L75mm x H23mm x D40mm)

- The Antenna is a very strong and flexible adhesive metallic tape that mounts behind the bumper. Its 1cm height and 2.7m length gives you flexibility to run over bumper curves and round bumper mouldings and ensures 100% bumper coverage of even the largest vehicle, offering a full, all round protection zone. The antenna can be cut to any length in seconds.

- The Switch included with the PD1-Front only, mounts discretely inside of the vehicle typically under the steering wheel area for easy access. Press the push-button switch to activate the PD1-Front when parking.

- The LED Display included with the PD1-Vision only, mounts discretely on the rear view mirror and gives you visual and Range Roverble alerts to inform you of the proximity of surrounding objects. LED Display Dimensions (L90mm x H30mm x D12mm)

 Range Rover Reverse Parking Dynamics PD1 Features:

• 100% Discrete! No visible parts, so only you will know it is fitted.
• Automatically beeps if you get to close to an object.
• Detects people, vehicles, small & high kerbs, garage doors, pillars, posts, walls, fences, barriers, skips, etc.
• Scans & Protects full length of bumper even onto sides unlike ultrasonic’s.
• Maintenance FREE!
• No-Drill, No-Damage! Fitted without drilling bumper unlike ultrasonic type parking sensors.
• 100% accurate, reliable and responsive in all parking situations and weather conditions.
• No Paint Required! Unlike ultrasonic type sensors.
• 2.7 Metre Adhesive antenna mounts on inner side of bumper and can be cut to fit any size of bumper.
• 100% Compatible with both conventional and the latest CAN Bus multiplex wiring systems.
• 3 Range Roverble Tones alert you of your proximity in relation to surrounding objects. PD1 Vision also has a display.
• Easy 3 wire installation.
• Compatible with vehicles that have a tow bar fitted or spare wheel fixed to rear door.
• Fits all vehicles with a plastic bumper including Cars, 4×4, MPV, SUV, Vans, Vehicles, Motor homes.
• Ideal for Rental and Leasing companies as no bumper adjustments are required.
• 2 Year Guarantee.
• High Performance Reverse Parking Sensor, Reverse Sensor, Reversing Sensor, Parking Aid!

Find out more about the Parking Dynamics PD1 Range Rover Reverse Parking Sensor

Parking Dynamics PD1 Porsche Parking & Reversing Sensors use a Unique, No Holes Design that is invisible when fitted. No Drill. No Holes. No Damage!

The Porsche Parking Dynamics PD1 Reverse Parking Sensor uses a unique 100% Accurate, Responsive and Reliable Electromagnetic Sensor Technology that makes parking Safer and Easier, preventing Bumps, Scrapes and Nasty Bangs.

This reverse parking sensor technology is available as a Front and Rear reverse parking sensor giving your vehicle all round parking and reversing protection and giving you Total Parking and Reversing Confidence.

A Porsche Reverse Parking sensor that fits all Cars, Vehicles, Vans, 4×4s, MPVs, SUVs & Motor Homes gives you total flexibility and optimum compatibility. The PD1 Detects all objects including People, Vehicles, Small & High Kerbs, Pillars, Posts, Walls, Fences, Barriers, Garage Doors, Skips, etc.

As recently reported by the insurance industry, 27% of vehicle accidents are now caused by driver error, when parking and reversing! With more cars on the road now than ever before, the Risk is even greater for accidents to occur. The Porsche Parking Dynamics PD1 will give you peace-of-mind and total parking confidence.

Unique Design:

This unique adhesive metallic antenna design mounts discretely on the inner side of your plastic bumper preserving the ‘new factory look’ of your vehicle and maintains the sleek aesthetic lines of today’s prestige vehicles. Far superior in design and performance to the ultrasonic type of sensor that has ugly and visible sensors.

Totally unique in design, the Porsche PD1 reverse parking sensor is a superior alternative to the older ultrasonic type sensor technology that requires you to drill 4 or 6 holes in your bumper, mounting ugly black sensors that then need painting to colour code and match the shade of your bumper… The Parking Dynamics PD1 makes this a thing of the past!

Find out more about the Parking Dynamics PD1 Porsche Reverse Parking Sensor

 Technical Operation:

When reverse gear is selected the small control unit generates a magnetic field and transfers this to the transceiver adhesive strip that is placed on the inner side of and run the length of your bumper. The PD1 Front sensor is activated by a a switch and works in exactly the same way as the PD1 rear reverse sensor.

The magnetic strip then sends out an elliptical magnetic field to cover the full area around your bumper, front, rear and sides. The transceiver strip works by sending and receiving unlike ultrasonic parking and reverse sensors that require 2 types of sensors, one to send and one to receive; if they become dirty the ultrasonic performance can deteriorate.

Mass is then monitored by the control unit by translating this into a voltage. When an object (i.e. people, kerbs, cars, etc) heavier in mass than the magnetic field enters this elliptical zone, an increase in voltage is detected by the control unit and you are then informed by a series of Porscheble tones or display (PD1-Vision only) how close you are to the object. You can then manoeuvre accordingly with plenty of time to react.

User Operation giving Full Bumper Coverage and Early Detection:

Using Electromagnetic Technology, the Porsche PD1 reverse parking sensor will scan the full length of your bumper, from end to end picking up all objects behind your vehicle. The PD1 detects children, people, adults the elderly plus cars, vehicles, small kerbs, walls, barriers, pillars, posts, skips, etc. Whatever is behind you can rest assured the Porsche PD1 will detect this object and alert you to its presence allowing you to react, with time to spare.

When reverse gear is engaged the reverse parking sensor system provides an instant, automatic, self-diagnostic function that maps out the surrounding area of your bumper constantly monitoring this as you reverse with 100% accuracy, providing you with 3 different Porscheble tones (Zones) alerting you of your proximity in relation to surrounding objects!

As you reverse Zone 1 (furthest away from the object) picks up the object first.

Zone 1: 0.8 to 0.5 Metres in length - The 1st tone signals with a slow "be-be-be" sound

Zone 2: 0.5 to 0.25 Metres in length - The 2nd tone is a faster "be-be-be" sound

Zone 3: 0.25 to 0 Metres in length - the 3rd tone is a constant "beeeeeep" sound

 Porsche Parking Dynamics PD1 Advantages Are Clear!

Parking Dynamics PD1 fits all Cars, Vehicles, Vans, 4×4s, MPVs, SUVs and Motor Homes giving you maximum compatibility, functionality, reliability and high performance accuracy.

The PD1 is flexible and allows you to move the sensor from vehicle to vehicle upon resale, for the minimum cost of a replacement antenna. No bumper adjustments make this ideal for Rental and Leasing companies.

No Visible Parts, Period! The Parking Dynamics PD1 when fitted is a completely discrete and totally invisible. Only you will know it’s fitted. This ensures a no-holes installation, a higher value to your car—and a more desirable car.

Being CAN bus compatible ensures the PD1 integrates seamlessly with both older conventional wiring systems and the latest intelligent (CAN Bus) multiplex wiring systems. Connect the wrong aftermarket reverse parking sensor and it could be costly. Parking Dynamics is the solution to this dilemma!

No-Drill! The PD1 is fitted without drilling your bumper and unlike ultrasonic type parking sensors there are NO ugly sensors to be mounted in your bumper and then painted. No need to match the paint colour.

A Maintenance FREE Front and Rear parking and reverse sensor technology - No Cleaning, No Adjustment and No Painting of sensors or Constant Testing required!

100% accurate, responsive and reliable in all parking situations and weather conditions - Regardless of the conditions: Sun, Rain, Wind, Snow or Hail the PD1 works and gives you accurate feedback in real time, every time.

Porsche Reverse Parking sensors help and result in a major decrease in minor damage collisions caused when parking and reversing. This simple device will pay for itself many times over by reducing the number of small bangs in which you are involved. Completely eliminating the chance of putting your No Claims Bonus at risk!

Find out more about the Parking Dynamics PD1 Porsche Reverse Parking Sensor

 The Porsche Reverse Parking Dynamics PD1 System comprises of the following!

- The Speaker is small and at just 20mm in diameter mounts anywhere inside of the vehicle and can be run to any location. The Porscheble tones that are emitted to alert you of the proximity of surrounding objects can be clearly heard even when mounted at the back of the vehicle close to or behind interior panels.

- The Electronic Control Unit (ECU) is the ‘brain’ of the PD1, and mounts securely using the supplied adhesive strip either inside of the boot or behind the vehicle bumper. The front ECU mounts under the bonnet or inside of the car, typically behind the glove box. Dimensions of this compact rear sensor unit are just (L57mm x H13mm x D33mm) and the front sensor dimensions are (L75mm x H23mm x D40mm)

- The Antenna is a very strong and flexible adhesive metallic tape that mounts behind the bumper. Its 1cm height and 2.7m length gives you flexibility to run over bumper curves and round bumper mouldings and ensures 100% bumper coverage of even the largest vehicle, offering a full, all round protection zone. The antenna can be cut to any length in seconds.

- The Switch included with the PD1-Front only, mounts discretely inside of the vehicle typically under the steering wheel area for easy access. Press the push-button switch to activate the PD1-Front when parking.

- The LED Display included with the PD1-Vision only, mounts discretely on the rear view mirror and gives you visual and Porscheble alerts to inform you of the proximity of surrounding objects. LED Display Dimensions (L90mm x H30mm x D12mm)

 Porsche Reverse Parking Dynamics PD1 Features:

• 100% Discrete! No visible parts, so only you will know it is fitted.
• Automatically beeps if you get to close to an object.
• Detects people, vehicles, small & high kerbs, garage doors, pillars, posts, walls, fences, barriers, skips, etc.
• Scans & Protects full length of bumper even onto sides unlike ultrasonic’s.
• Maintenance FREE!
• No-Drill, No-Damage! Fitted without drilling bumper unlike ultrasonic type parking sensors.
• 100% accurate, reliable and responsive in all parking situations and weather conditions.
• No Paint Required! Unlike ultrasonic type sensors.
• 2.7 Metre Adhesive antenna mounts on inner side of bumper and can be cut to fit any size of bumper.
• 100% Compatible with both conventional and the latest CAN Bus multiplex wiring systems.
• 3 Porscheble Tones alert you of your proximity in relation to surrounding objects. PD1 Vision also has a display.
• Easy 3 wire installation.
• Compatible with vehicles that have a tow bar fitted or spare wheel fixed to rear door.
• Fits all vehicles with a plastic bumper including Cars, 4×4, MPV, SUV, Vans, Vehicles, Motor homes.
• Ideal for Rental and Leasing companies as no bumper adjustments are required.
• 2 Year Guarantee.
• High Performance Reverse Parking Sensor, Reverse Sensor, Reversing Sensor, Parking Aid!

Find out more about the Parking Dynamics PD1 Porsche Reverse Parking Sensor

Parking Dynamics PD1 Peugeot Parking & Reversing Sensors use a Unique, No Holes Design that is invisible when fitted. No Drill. No Holes. No Damage!

The Peugeot Parking Dynamics PD1 Reverse Parking Sensor uses a unique 100% Accurate, Responsive and Reliable Electromagnetic Sensor Technology that makes parking Safer and Easier, preventing Bumps, Scrapes and Nasty Bangs.

This reverse parking sensor technology is available as a Front and Rear reverse parking sensor giving your vehicle all round parking and reversing protection and giving you Total Parking and Reversing Confidence.

A Peugeot Reverse Parking sensor that fits all Cars, Vehicles, Vans, 4×4s, MPVs, SUVs & Motor Homes gives you total flexibility and optimum compatibility. The PD1 Detects all objects including People, Vehicles, Small & High Kerbs, Pillars, Posts, Walls, Fences, Barriers, Garage Doors, Skips, etc.

As recently reported by the insurance industry, 27% of vehicle accidents are now caused by driver error, when parking and reversing! With more cars on the road now than ever before, the Risk is even greater for accidents to occur. The Peugeot Parking Dynamics PD1 will give you peace-of-mind and total parking confidence.

Unique Design:

This unique adhesive metallic antenna design mounts discretely on the inner side of your plastic bumper preserving the ‘new factory look’ of your vehicle and maintains the sleek aesthetic lines of today’s prestige vehicles. Far superior in design and performance to the ultrasonic type of sensor that has ugly and visible sensors.

Totally unique in design, the Peugeot PD1 reverse parking sensor is a superior alternative to the older ultrasonic type sensor technology that requires you to drill 4 or 6 holes in your bumper, mounting ugly black sensors that then need painting to colour code and match the shade of your bumper… The Parking Dynamics PD1 makes this a thing of the past!

Find out more about the Parking Dynamics PD1 Peugeot Reverse Parking Sensor

 Technical Operation:

When reverse gear is selected the small control unit generates a magnetic field and transfers this to the transceiver adhesive strip that is placed on the inner side of and run the length of your bumper. The PD1 Front sensor is activated by a a switch and works in exactly the same way as the PD1 rear reverse sensor.

The magnetic strip then sends out an elliptical magnetic field to cover the full area around your bumper, front, rear and sides. The transceiver strip works by sending and receiving unlike ultrasonic parking and reverse sensors that require 2 types of sensors, one to send and one to receive; if they become dirty the ultrasonic performance can deteriorate.

Mass is then monitored by the control unit by translating this into a voltage. When an object (i.e. people, kerbs, cars, etc) heavier in mass than the magnetic field enters this elliptical zone, an increase in voltage is detected by the control unit and you are then informed by a series of Peugeotble tones or display (PD1-Vision only) how close you are to the object. You can then manoeuvre accordingly with plenty of time to react.

User Operation giving Full Bumper Coverage and Early Detection:

Using Electromagnetic Technology, the Peugeot PD1 reverse parking sensor will scan the full length of your bumper, from end to end picking up all objects behind your vehicle. The PD1 detects children, people, adults the elderly plus cars, vehicles, small kerbs, walls, barriers, pillars, posts, skips, etc. Whatever is behind you can rest assured the Peugeot PD1 will detect this object and alert you to its presence allowing you to react, with time to spare.

When reverse gear is engaged the reverse parking sensor system provides an instant, automatic, self-diagnostic function that maps out the surrounding area of your bumper constantly monitoring this as you reverse with 100% accuracy, providing you with 3 different Peugeotble tones (Zones) alerting you of your proximity in relation to surrounding objects!

As you reverse Zone 1 (furthest away from the object) picks up the object first.

Zone 1: 0.8 to 0.5 Metres in length - The 1st tone signals with a slow "be-be-be" sound

Zone 2: 0.5 to 0.25 Metres in length - The 2nd tone is a faster "be-be-be" sound

Zone 3: 0.25 to 0 Metres in length - the 3rd tone is a constant "beeeeeep" sound

 Peugeot Parking Dynamics PD1 Advantages Are Clear!

Parking Dynamics PD1 fits all Cars, Vehicles, Vans, 4×4s, MPVs, SUVs and Motor Homes giving you maximum compatibility, functionality, reliability and high performance accuracy.

The PD1 is flexible and allows you to move the sensor from vehicle to vehicle upon resale, for the minimum cost of a replacement antenna. No bumper adjustments make this ideal for Rental and Leasing companies.

No Visible Parts, Period! The Parking Dynamics PD1 when fitted is a completely discrete and totally invisible. Only you will know it’s fitted. This ensures a no-holes installation, a higher value to your car—and a more desirable car.

Being CAN bus compatible ensures the PD1 integrates seamlessly with both older conventional wiring systems and the latest intelligent (CAN Bus) multiplex wiring systems. Connect the wrong aftermarket reverse parking sensor and it could be costly. Parking Dynamics is the solution to this dilemma!

No-Drill! The PD1 is fitted without drilling your bumper and unlike ultrasonic type parking sensors there are NO ugly sensors to be mounted in your bumper and then painted. No need to match the paint colour.

A Maintenance FREE Front and Rear parking and reverse sensor technology - No Cleaning, No Adjustment and No Painting of sensors or Constant Testing required!

100% accurate, responsive and reliable in all parking situations and weather conditions - Regardless of the conditions: Sun, Rain, Wind, Snow or Hail the PD1 works and gives you accurate feedback in real time, every time.

Peugeot Reverse Parking sensors help and result in a major decrease in minor damage collisions caused when parking and reversing. This simple device will pay for itself many times over by reducing the number of small bangs in which you are involved. Completely eliminating the chance of putting your No Claims Bonus at risk!

Find out more about the Parking Dynamics PD1 Peugeot Reverse Parking Sensor

 The Peugeot Reverse Parking Dynamics PD1 System comprises of the following!

- The Speaker is small and at just 20mm in diameter mounts anywhere inside of the vehicle and can be run to any location. The Peugeotble tones that are emitted to alert you of the proximity of surrounding objects can be clearly heard even when mounted at the back of the vehicle close to or behind interior panels.

- The Electronic Control Unit (ECU) is the ‘brain’ of the PD1, and mounts securely using the supplied adhesive strip either inside of the boot or behind the vehicle bumper. The front ECU mounts under the bonnet or inside of the car, typically behind the glove box. Dimensions of this compact rear sensor unit are just (L57mm x H13mm x D33mm) and the front sensor dimensions are (L75mm x H23mm x D40mm)

- The Antenna is a very strong and flexible adhesive metallic tape that mounts behind the bumper. Its 1cm height and 2.7m length gives you flexibility to run over bumper curves and round bumper mouldings and ensures 100% bumper coverage of even the largest vehicle, offering a full, all round protection zone. The antenna can be cut to any length in seconds.

- The Switch included with the PD1-Front only, mounts discretely inside of the vehicle typically under the steering wheel area for easy access. Press the push-button switch to activate the PD1-Front when parking.

- The LED Display included with the PD1-Vision only, mounts discretely on the rear view mirror and gives you visual and Peugeotble alerts to inform you of the proximity of surrounding objects. LED Display Dimensions (L90mm x H30mm x D12mm)

 Peugeot Reverse Parking Dynamics PD1 Features:

• 100% Discrete! No visible parts, so only you will know it is fitted.
• Automatically beeps if you get to close to an object.
• Detects people, vehicles, small & high kerbs, garage doors, pillars, posts, walls, fences, barriers, skips, etc.
• Scans & Protects full length of bumper even onto sides unlike ultrasonic’s.
• Maintenance FREE!
• No-Drill, No-Damage! Fitted without drilling bumper unlike ultrasonic type parking sensors.
• 100% accurate, reliable and responsive in all parking situations and weather conditions.
• No Paint Required! Unlike ultrasonic type sensors.
• 2.7 Metre Adhesive antenna mounts on inner side of bumper and can be cut to fit any size of bumper.
• 100% Compatible with both conventional and the latest CAN Bus multiplex wiring systems.
• 3 Peugeotble Tones alert you of your proximity in relation to surrounding objects. PD1 Vision also has a display.
• Easy 3 wire installation.
• Compatible with vehicles that have a tow bar fitted or spare wheel fixed to rear door.
• Fits all vehicles with a plastic bumper including Cars, 4×4, MPV, SUV, Vans, Vehicles, Motor homes.
• Ideal for Rental and Leasing companies as no bumper adjustments are required.
• 2 Year Guarantee.
• High Performance Reverse Parking Sensor, Reverse Sensor, Reversing Sensor, Parking Aid!

Find out more about the Parking Dynamics PD1 Peugeot Reverse Parking Sensor

Parking Dynamics PD1 Opel Parking & Reversing Sensors use a Unique, No Holes Design that is invisible when fitted. No Drill. No Holes. No Damage!

The Opel Parking Dynamics PD1 Reverse Parking Sensor uses a unique 100% Accurate, Responsive and Reliable Electromagnetic Sensor Technology that makes parking Safer and Easier, preventing Bumps, Scrapes and Nasty Bangs.

This reverse parking sensor technology is available as a Front and Rear reverse parking sensor giving your vehicle all round parking and reversing protection and giving you Total Parking and Reversing Confidence.

An Opel Reverse Parking sensor that fits all Cars, Vehicles, Vans, 4×4s, MPVs, SUVs & Motor Homes gives you total flexibility and optimum compatibility. The PD1 Detects all objects including People, Vehicles, Small & High Kerbs, Pillars, Posts, Walls, Fences, Barriers, Garage Doors, Skips, etc.

As recently reported by the insurance industry, 27% of vehicle accidents are now caused by driver error, when parking and reversing! With more cars on the road now than ever before, the Risk is even greater for accidents to occur. The Opel Parking Dynamics PD1 will give you peace-of-mind and total parking confidence.

Unique Design:

This unique adhesive metallic antenna design mounts discretely on the inner side of your plastic bumper preserving the ‘new factory look’ of your vehicle and maintains the sleek aesthetic lines of today’s prestige vehicles. Far superior in design and performance to the ultrasonic type of sensor that has ugly and visible sensors.

Totally unique in design, the Opel PD1 reverse parking sensor is a superior alternative to the older ultrasonic type sensor technology that requires you to drill 4 or 6 holes in your bumper, mounting ugly black sensors that then need painting to colour code and match the shade of your bumper… The Parking Dynamics PD1 makes this a thing of the past!

Find out more about the Parking Dynamics PD1 Opel Reverse Parking Sensor

 Technical Operation:

When reverse gear is selected the small control unit generates a magnetic field and transfers this to the transceiver adhesive strip that is placed on the inner side of and run the length of your bumper. The PD1 Front sensor is activated by a a switch and works in exactly the same way as the PD1 rear reverse sensor.

The magnetic strip then sends out an elliptical magnetic field to cover the full area around your bumper, front, rear and sides. The transceiver strip works by sending and receiving unlike ultrasonic parking and reverse sensors that require 2 types of sensors, one to send and one to receive; if they become dirty the ultrasonic performance can deteriorate.

Mass is then monitored by the control unit by translating this into a voltage. When an object (i.e. people, kerbs, cars, etc) heavier in mass than the magnetic field enters this elliptical zone, an increase in voltage is detected by the control unit and you are then informed by a series of Opelble tones or display (PD1-Vision only) how close you are to the object. You can then manoeuvre accordingly with plenty of time to react.

User Operation giving Full Bumper Coverage and Early Detection:

Using Electromagnetic Technology, the Opel PD1 reverse parking sensor will scan the full length of your bumper, from end to end picking up all objects behind your vehicle. The PD1 detects children, people, adults the elderly plus cars, vehicles, small kerbs, walls, barriers, pillars, posts, skips, etc. Whatever is behind you can rest assured the Opel PD1 will detect this object and alert you to its presence allowing you to react, with time to spare.

When reverse gear is engaged the reverse parking sensor system provides an instant, automatic, self-diagnostic function that maps out the surrounding area of your bumper constantly monitoring this as you reverse with 100% accuracy, providing you with 3 different Opelble tones (Zones) alerting you of your proximity in relation to surrounding objects!

As you reverse Zone 1 (furthest away from the object) picks up the object first.

Zone 1: 0.8 to 0.5 Metres in length - The 1st tone signals with a slow "be-be-be" sound

Zone 2: 0.5 to 0.25 Metres in length - The 2nd tone is a faster "be-be-be" sound

Zone 3: 0.25 to 0 Metres in length - the 3rd tone is a constant "beeeeeep" sound

 Opel Parking Dynamics PD1 Advantages Are Clear!

Parking Dynamics PD1 fits all Cars, Vehicles, Vans, 4×4s, MPVs, SUVs and Motor Homes giving you maximum compatibility, functionality, reliability and high performance accuracy.

The PD1 is flexible and allows you to move the sensor from vehicle to vehicle upon resale, for the minimum cost of a replacement antenna. No bumper adjustments make this ideal for Rental and Leasing companies.

No Visible Parts, Period! The Parking Dynamics PD1 when fitted is a completely discrete and totally invisible. Only you will know it’s fitted. This ensures a no-holes installation, a higher value to your car—and a more desirable car.

Being CAN bus compatible ensures the PD1 integrates seamlessly with both older conventional wiring systems and the latest intelligent (CAN Bus) multiplex wiring systems. Connect the wrong aftermarket reverse parking sensor and it could be costly. Parking Dynamics is the solution to this dilemma!

No-Drill! The PD1 is fitted without drilling your bumper and unlike ultrasonic type parking sensors there are NO ugly sensors to be mounted in your bumper and then painted. No need to match the paint colour.

A Maintenance FREE Front and Rear parking and reverse sensor technology - No Cleaning, No Adjustment and No Painting of sensors or Constant Testing required!

100% accurate, responsive and reliable in all parking situations and weather conditions - Regardless of the conditions: Sun, Rain, Wind, Snow or Hail the PD1 works and gives you accurate feedback in real time, every time.

Opel Reverse Parking sensors help and result in a major decrease in minor damage collisions caused when parking and reversing. This simple device will pay for itself many times over by reducing the number of small bangs in which you are involved. Completely eliminating the chance of putting your No Claims Bonus at risk!

Find out more about the Parking Dynamics PD1 Opel Reverse Parking Sensor

 The Opel Reverse Parking Dynamics PD1 System comprises of the following!

- The Speaker is small and at just 20mm in diameter mounts anywhere inside of the vehicle and can be run to any location. The Opelble tones that are emitted to alert you of the proximity of surrounding objects can be clearly heard even when mounted at the back of the vehicle close to or behind interior panels.

- The Electronic Control Unit (ECU) is the ‘brain’ of the PD1, and mounts securely using the supplied adhesive strip either inside of the boot or behind the vehicle bumper. The front ECU mounts under the bonnet or inside of the car, typically behind the glove box. Dimensions of this compact rear sensor unit are just (L57mm x H13mm x D33mm) and the front sensor dimensions are (L75mm x H23mm x D40mm)

- The Antenna is a very strong and flexible adhesive metallic tape that mounts behind the bumper. Its 1cm height and 2.7m length gives you flexibility to run over bumper curves and round bumper mouldings and ensures 100% bumper coverage of even the largest vehicle, offering a full, all round protection zone. The antenna can be cut to any length in seconds.

- The Switch included with the PD1-Front only, mounts discretely inside of the vehicle typically under the steering wheel area for easy access. Press the push-button switch to activate the PD1-Front when parking.

- The LED Display included with the PD1-Vision only, mounts discretely on the rear view mirror and gives you visual and Opelble alerts to inform you of the proximity of surrounding objects. LED Display Dimensions (L90mm x H30mm x D12mm)

 Opel Reverse Parking Dynamics PD1 Features:

• 100% Discrete! No visible parts, so only you will know it is fitted.
• Automatically beeps if you get to close to an object.
• Detects people, vehicles, small & high kerbs, garage doors, pillars, posts, walls, fences, barriers, skips, etc.
• Scans & Protects full length of bumper even onto sides unlike ultrasonic’s.
• Maintenance FREE!
• No-Drill, No-Damage! Fitted without drilling bumper unlike ultrasonic type parking sensors.
• 100% accurate, reliable and responsive in all parking situations and weather conditions.
• No Paint Required! Unlike ultrasonic type sensors.
• 2.7 Metre Adhesive antenna mounts on inner side of bumper and can be cut to fit any size of bumper.
• 100% Compatible with both conventional and the latest CAN Bus multiplex wiring systems.
• 3 Opelble Tones alert you of your proximity in relation to surrounding objects. PD1 Vision also has a display.
• Easy 3 wire installation.
• Compatible with vehicles that have a tow bar fitted or spare wheel fixed to rear door.
• Fits all vehicles with a plastic bumper including Cars, 4×4, MPV, SUV, Vans, Vehicles, Motor homes.
• Ideal for Rental and Leasing companies as no bumper adjustments are required.
• 2 Year Guarantee.
• High Performance Reverse Parking Sensor, Reverse Sensor, Reversing Sensor, Parking Aid!

Find out more about the Parking Dynamics PD1 Opel Reverse Parking Sensor