Simplified, a Parking Sensor also known as a Car Parking Sensor, Parking Aid or Reverse Parking Sensor enables you to carry out accurate and safe parking and reversing manoeuvres without the anxiety of bumping your Car, Vehicle, Van, 4x4, Motorhome, Caravan, Trailer or Horse Box. It is literally like having eyes located in your front and rear bumper.

Ultrasonic V's Electromagnetic Technology (PD1)

There are 2 types of parking sensor technologies available on the market. The older less reliable technology is ultrasonic and typically uses 4 or 6 sensors that mount in the bumper for all to see. Holes need drilling in your bumper to mount and they need painting to match your bumper colour.

Also many ultrasonic systems are physically too deep to install in to bumpers, due to the crash protection bar behind the bumper. The PD1 eliminates this problem! 

The PD1 uses a unique Electromagnetic Technology, typically used by a few elite car manufacturers and offers a design that discretely mounts preserving the 'new factory look' of your vehicle, so only you will know it is fitted.

Ultrasonic technology having 4 or 6 visible and exposed sensors does need regular maintenance and cleaning. Electromagnetic technology is not exposed, is self diagnostic and requires no maintenance.

Many accidents occur because drivers can't see the corners of their car and how far the edge of the bumpers protrude from the rest of the body. The electromagnetic design allows for this, as the antenna covers the entire length of the bumper and this is superior to the ultrasonic type that cannot detect objects at the very corners and onto the sides.

Introducing the "No Holes" Parking Dynamics PD1 Parking Sensor

The Parking Dynamics PD1 Parking Sensor uses a No-Drill, No-Holes, Unique, Discrete, 100% Responsive and Reliable Electromagnetic Technology making parking Safer and Easier, preventing Bumps, Scrapes and Tragic Accidents. Whatever vehicle the PD1 is fitted to, you can rest assured that the aesthetic clean lines of your car and bumper will be untouched maintaining and maximising its resale value.
 
Save on your Car Insurance

As recently reported by the insurance industry, 33% of vehicle accidents are now caused by driver error, when parking and reversing! With more cars on the road now than ever before, the Risk is even greater for accidents to occur. The Parking Dynamics PD1 will give you peace-of-mind and total parking confidence. 

This simple device will pay for itself many times over by reducing the number of small bangs in which you are involved. Completely eliminating the chance of putting your No Claims Bonus at risk!

All Round Parking Protection (front parking sensors & rear parking sensors)

To add even greater accuracy, detection and protection to your vehicle when parking and further reduce the potential for an insurance claim, the Parking Dynamics PD1 gives you 2 sensor pack options, Front parking sensors and Rear parking sensors. Both packs work on the same ultra effective electromagnetic concept and operation but have 2 very different alert tones to distinguish them apart. 

Both work independently on separate circuits and ultimately give you the all round protection required for effortless and bump-free parking and reversing manoeuvres.

Technical Operation

When reverse gear is selected the small electronic control unit generates a electromagnetic field and transfers this to the transceiver adhesive strip that is placed on the inner side of and run the full length of your bumper.

The magnetic strip then sends out an elliptical magnetic field to cover full the area around your bumper, rear and sides. The transceiver strip works by sending and receiving unlike ultrasonic parking sensors that require 2 types of sensors, one to send and one to receive; if they become dirty the ultrasonic performance can deteriorate.

Mass is then monitored by the control unit by translating this into a voltage. When an object (i.e. people, kerbs, cars, etc) heavier in mass than the magnetic field enters this elliptical zone, an increase in voltage is detected by the control unit and you are then informed of your proximity by a series of audible tones how close you are to the object. You can then manoeuvre accordingly with omre than enough time to react.

PD1 Compatibility Guide:

CAN Bus Systems

Many new cars and vehicles now come with the CAN Bus multiplex wiring system fitted. The PD-1 is fully CAN Bus compatible and requires no adjustment or extra accessories when installing. Beware of ultrasonic sytems that require extra wiring and relay components in order to integrate with CAN Bus.

CAN Bus is a multiplexed wiring system used to connect intelligent devices such as Electronic Control Units (ECU's) on vehicles, allowing data to be transferred in a low-cost and reliable manner. CAN means 'Controller Area Network' and was developed by Bosch in 1980. Many new cars and vehicles use this system and it is becoming increasingly difficult to install after-market products without using a CAN Bus compatible device.

Vehicles with a Tow Bar

Parking Dynamics PD1 is the recommended Parking Sensor for vehicles with a Tow bar fitted as performance is not affected. Its the only Parking Sensor available that is compatible with vehicles that have a towbar fitted.

Vehicles with Spare Wheel on Rear Door

The Parking Dynamics PD1 will continue to operate effectively when fitted to vehicles with a Spare Wheel on the rear door such as 4x4, MPV or SUV's. We have fitted many PD1 parking sensors to these vehicles without problems.

Vehicles with a Metal Bumper

The Parking Dynamics PD1 is NOT compatible with metal bumpers straight out of the box. However with a few insulating adjustments to your metal bumper, the PD1 will be fully compatible.